Results 51 to 60 of about 12,550 (263)

Active Corrosion Protection of Sintered AA7075 Aluminum Alloy via Mn Powder Addition

open access: yesAdvanced Engineering Materials, EarlyView.
AA7075 containing Mn‐rich particles is fabricated via spark plasma sintering using AA7075 and Mn powders. Corrosion resistance is evaluated through dip‐and‐dry tests using 0.1 M NaCl (pH 6.0), and mass loss decreases with increasing Mn addition. Mn‐rich particles function as a source of Mn ions, and formation of Mn‐accumulation films on Cu‐containing ...
Ko Ebina, Masashi Nishimoto, Izumi Muto
wiley   +1 more source

Extrusion‐Based Additive Manufacturing of Advanced Ceramics: Strengthening Mechanisms and Process Optimization Review

open access: yesAdvanced Engineering Materials, EarlyView.
This review comprehensively evaluates extrusion‐based additive manufacturing for advanced ceramics, detailing feedstock options and key process parameters. By critically addressing defect mechanisms like porosity and cracking, the work highlights optimization strategies through machine learning and advanced postprocessing.
Meisam Bakhtiari   +4 more
wiley   +1 more source

Superlubricity and Corrosion Inhibition Properties of Solvate Ionic Liquids in Hybrid Carbon Fiber Reinforced Plastic–Steel Interfaces

open access: yesAdvanced Engineering Materials, EarlyView.
Solvate ionic liquids lubrication reduced the coefficient of friction by ∼60% compared to dry sliding, reaching steady‐state values as low as 0.04–0.05. Corrosion weight‐loss measurements in 1 M HCl further demonstrated significant inhibition behavior, with only 100 ppm of [Li(G3)][TFSI] (∼68.5 μL/L) reducing corrosion‐product weight loss by 63 ...
Sameh Dabees   +6 more
wiley   +1 more source

Irradiation‐Induced Spin Bath Evolution and as‐Grown Hydrogen Defects in CVD Diamond Revealed by NV‐Based DEER Spectroscopy

open access: yesAdvanced Functional Materials, EarlyView.
Here, we provide the reader with the current state of the art in the fabrication of high‐T2‐coherence diamond, optimized through the use of double electron–electron resonance (DEER) spectroscopy. We reveal the main as well as yet unidentified spin defects, the reduction of which is essential for reducing the spin bath and fabricating materials for ...
Olga Rubinas   +6 more
wiley   +1 more source

The Solar-Assisted Vertical Ground Source Heat Pump System in Cold Climates—A Case Study

open access: yesProceedings, 2020
In this paper, experimental studies were performed for a solar ground source heat pump system (SGSHPS) with a vertical ground heat exchanger (VGHE). The experiment was operated during the summer in 2018. The heat from the solar collector was monitored by
Piotr Rynkowski
doaj   +1 more source

Advances in Sustainable and Wearable Textile Based Soft Robotics

open access: yesAdvanced Functional Materials, EarlyView.
This Review examines advances in wearable textile‐based soft robotics, focusing on sustainable materials, integrated sensing, and scalable actuation. It discusses manufacturing and system integration across healthcare, assistive robotics, prosthetics, and human–machine interfaces, and highlights key challenges in circular design, including life‐cycle ...
Zahir Abbas   +6 more
wiley   +1 more source

Support‐Controlled Reaction Pathways via Dynamic Sulfur‐Mediated Interfaces for Selective Urea Electrolysis

open access: yesAdvanced Functional Materials, EarlyView.
Sulfur‐doped graphitized carbon nanofibers act as adaptive catalyst–support platforms, enabling dynamic sulfur‐mediated reconstruction and strong metal–support interactions. This unique behavior enhances catalyst stability and controls reaction pathways, achieving highly selective urea oxidation (∼92% N2) coupled with efficient hydrogen evolution ...
Melanie Guillén‐Soler   +4 more
wiley   +1 more source

On the Design and Response of Domestic Ground-Source Heat Pumps in the UK

open access: yesEnergies, 2014
The design and response of ground source heat pumps coupled to vertical closed loop arrays in UK domestic applications are investigated in this article.
Chris Underwood
doaj   +1 more source

Electrospun Wood‐Derived Biopolymers as Electrodes in Electrochemical Energy Storage Technologies

open access: yesAdvanced Functional Materials, EarlyView.
Electrospinning transforms wood‐derived cellulose and lignin into architecturally defined, binder‐free carbon electrodes with tuneable porosity and functionality. This review shows how fibre design enables decoupled charge and mass transport, enhancing performance across battery systems, while identifying key challenges in spinnability, scalability ...
Michael W. Thielke   +3 more
wiley   +1 more source

A Novel Modified Petroresin Particle (MPRP) With Enhanced Oil–Water Selectivity for Cold Production in Heavy Oil Reservoirs

open access: yesAdvanced Functional Materials, EarlyView.
A novel oil–water selective conformance control agent, MPRP, is prepared via hydrophilic grafting and mechanical granulation. MPRP uniformly disperses in water, cohesively expands upon aging, and readily dissolves in the oil phase. During conformance control, it selectively aggregates in water channeling pathways to form effective plugs without ...
Guang Zhao   +6 more
wiley   +1 more source

Home - About - Disclaimer - Privacy