Results 81 to 90 of about 22,556,402 (253)

Jute stick-microcrystalline cellulose as a functional additive in gypsum composites: Comparative performance against jute stick powder

Results in Engineering
Gypsum-based materials are widely used in construction due to their low density and fire resistance; however, their brittleness and moisture sensitivity limit broader application.
Mohammed Siddiq Abdul Rahim, Karnan Manickavasakam, M. Aminul Haque, Shaik Inayath Basha, Nasirudeen Olalekan Ogunlakin, Mohammed A. Al‐Osta, Md. Abdul Aziz   +6 more
doaj   +1 more source

Gypsum–Cement–Pozzolan Composites for 3D Printing: Properties and Life Cycle Assessment

Over the past decade, 3D printing with concrete has been widely adopted worldwide. The primary drivers for this innovation are the reduction in manual labor and the more efficient use of natural resources.
Diana Bajare, Alise Sapata, Liga Puzule, Girts Bumanis, Peteris Slosbergs, Genadijs Sahmenko, Maris Sinka   +6 more
core   +1 more source

An Elasto–Plastic Hydro–Mechanical Model for Analyzing the Swelling Behavior of Heterogeneous Clay–Sulfate Rocks

International Journal for Numerical and Analytical Methods in Geomechanics, EarlyView.
ABSTRACT Swelling of clay‐sulfate rocks is a concern in geotechnical engineering that can damage infrastructure. In the historic town of Staufen in southwest Germany, geothermal drilling into a swellable anhydrite‐bearing clay formation resulted in water inflow and subsequent swelling, triggering ground heave and damage to more than 250 houses.
Reza Mahmoudi Kouhi, Reza Taherdangkoo, Thomas Nagel, Faramarz Doulati Ardejani, Christoph Butscher   +4 more
wiley   +1 more source

Development of Cellulosic Bioplastic‐Based Biocomposites for Biodegradable Packaging Applications: Effect of High Acetyl Content and High Filler Loading

Polymer Engineering &Science, EarlyView.
Schematic representation of the development of cellulosic bioplastic‐based biocomposites via reactive extrusion and injection molding, demonstrating improved oxygen and water vapor barrier properties for biodegradable packaging applications. ABSTRACT Cellulosic bioplastics have attained significant interest because of their biodegradability and ...
Reshma Krishnan, Manjusri Misra, Amar K. Mohanty   +2 more
wiley   +1 more source

Investigating the Environmental Impact of Additive Construction: A Systematic Analysis of the Life Cycle Assessment Studies

Sustainable Development, EarlyView.
ABSTRACT Additive Manufacturing (AM) has been identified as a potential catalyst for a paradigm shift within the construction industry, due to its capacity to enhance sustainability, reduce waste, and augment design flexibility. This study presents a systematic literature review (SLR) that explores the application of Life Cycle Assessment (LCA) in ...
Antonio Mastropasqua, Francesco Paolo Lagrasta, Michele De Nicolò, Pierpaolo Pontrandolfo   +3 more
wiley   +1 more source

Foamed Concrete Sealing Materials for Coal Seam Gas Drainage Boreholes: A Review

Safety Science and Technology, EarlyView.
This study investigates the sealing performance of foamed concrete in gas drainage boreholes. By comparing leakage pathways (a, c) with sealed systems (b, d), the research demonstrates how foamed concrete effectively fills mining‐induced fractures and resists deformation.
Jiaxing Zou, Erlei Su, Huanchun Liu, Xiangjun Chen, Lin Wang, Haidong Chen, Lin Li   +6 more
wiley   +1 more source

Experimental investigation of recycled HDPE waste fiber-reinforced gypsum with emphasis on durability and mechanical performance

Results in Engineering
The increasing demand for sustainable and durable construction materials has prompted interest in utilizing recycled waste in high-performance building composites.
Warun Na Songkhla, Chalermphol Chaikaew, Burachat Chatveera, Gritsada Sua-iam   +3 more
doaj   +1 more source

Influence of natural fibers on physical, mechanical, and fire‐resistant properties of microconcrete

Structural Concrete, EarlyView.
Abstract This study examined the influence of natural fibers on the physical, mechanical, and fire‐resistant properties of microconcrete, in comparison with conventional polypropylene fibers used in cement composites. The fibers were characterized by FTIR and TGA/DSC to assess their composition and thermal stability, and FTIR was also performed after ...
Ivanka Netinger Grubeša, Sandra Juradin, Silvija Mrakovčić, Lidija Radovanović, Milica Vasić, Huseyin Bilgin   +5 more
wiley   +1 more source

Cold‐curing effects on the strength development and sulfuric acid resistance of basalt fiber‐reinforced hybrid alkali‐activated slag mortars

Structural Concrete, EarlyView.
Abstract Cold weather conditions impose substantial constraints upon the performance and long‐term resilience of concrete materials. Alkali‐activated slag (AAS) presents itself as a promising substitute, exhibiting sustained hydraulic activity even when exposed to ambient conditions characterized by low temperatures.
Zeynep Bahçeci, Murat Dener, Ahmet Benli, Bilal Balun   +3 more
wiley   +1 more source

Structural testing and analytical model of Reinforced Concrete (RC) prisms with 3D‐printed concrete permanent formwork under compressive loading

Structural Concrete, EarlyView.
Abstract The implementation of traditional steel reinforcement in 3D concrete printed structures is a major challenge. Although 3D‐printed structures may be used as formwork, the knowledge about their structural contribution is limited. This research aims to experimentally evaluate the structural performance of reinforced concrete prisms with 3D ...
Luis M. de la Flor Juncal, Allan Scott, Don Clucas, Giuseppe Loporcaro   +3 more
wiley   +1 more source