Results 41 to 50 of about 98,043 (313)
Advanced Engineering Materials, EarlyView.Freeze‐drying of layered silicate is the key to get coatings with superior gas barrier. Freeze‐drying of layered silicates modified with dodecylamine (DDA) is a highly effective technique for the preparation of barrier pigments that significantly mitigate the permeation of oxygen, water vapor, and hydrogen through polymer films containing these ...
Joshua Lommes +4 more
wiley +1 more source
Chromium ion plating studies for enhancement of bearing lifetime [PDF]
, 1982 Six 440-C hardened stainless steel roller bearing test rods were ion plated with various chromium films of thicknesses from .2 microns to 7 microns.
Davis, J. H.
core +1 more source
Advanced Engineering Materials, EarlyView.Microstructural evolution and hardness optimization along the cross‐section of friction stir welded AA6061/AlSi10MgMn joints, for electric vehicle battery housings, were investigated. Postweld aging between 170°C and 220°C enhances hardness uniformity within the nugget zone.
Emanuele Ghio, Emanuela Cerri
wiley +1 more source
Технічна інженеріяThe article presents the results of experimental studies on the influence of various cutting regimes on the surface roughness of high-hardness hardened steel obtained after face milling with polycrystalline cubic boron nitride (PCBN) tools, both uncoated
Ya.Р. Kovalenko, P.Р. Melnychuk
doaj +1 more source
Selected Scientific Papers: Journal of Civil Engineering, 2021 The current study aims at highlighting the fresh and hardened characteristics of self-compacting concrete (SCC) incorporating marble powder and steel fibers at different sizes. Seven SCC mixtures were investigated with two different types of steel fibers
Haddadou Naima +4 more
doaj +1 more source
Modification of the Surface of 40 Kh Steel by Electrolytic Plasma Hardening
Metals, 2022 The high-strength, medium-carbon alloy construction steel 40 Kh is commonly used in the manufacture of tools and machine parts. This paper experimentally investigates the effect of electrolytic plasma thermocyclic hardening on the surface hardening and ...
Zhuldyz Sagdoldina +6 more
doaj +1 more source
New hardenable CERMETS for cutting and forming applications [PDF]
, 2008 The University Carlos III has developed a new metal matrix composite (MMC) constituted by a dispersion of ceramic particles of TiCN in a steel matrix. The matrix can be hardened by heat treatment, leading to a material with high hardness and toughness ...
Gordo Odériz, Elena
core +1 more source
A Technique for Making Nuclear Fusion in Solids [PDF]
, 2017 A technique is described for making nuclear fusion at room temperature by compressing a powder mixture comprising a deuteride and catalytic material. The result is explosive beyond known chemical reaction for the materials.
WAYTE, RICHARD
core +1 more source
Can Ti‐Based MXenes Serve as Solid Lubricants for Brake Applications? A Tribological Study
Advanced Engineering Materials, EarlyView.This study explores the first implementation of Ti‐based MXenes materials in brake pad friction composite material. The resulting composite material exhibits a 48% reduction in the wear rate; alongside significant improvements are observed for thermal and mechanical properties.
Eslam Mahmoud +7 more
wiley +1 more source
Physical and tribological properties of Nitrided AISI 316 stainless steel balls [PDF]
, 2016 AISI 316 austenitic stainless steel balls (diameters 5.0 and 12.0 mm, typical hardness 250 HV0.3) and flat samples (20×20×2.0 mm) were nitrided by a pulsed glow discharge Ar/N2 plasma. Hardness of the ball surfaces was analyzed using Vickers indentation.
Akinlabi +10 more
core +2 more sources