Results 61 to 70 of about 2,338 (211)
A Study on Hardfacing Alloy Using Fe–Cr and Fe–B Powders [PDF]
The aim of this study is the investigation of the effect of ferroboron and ferrochromium with massive wire based hardfacing alloys. Mixture of Fe–Cr and Fe–B powders was added to massive wire during welding process. Hardface layers were obtained by three
Karip, E. +5 more
core +1 more source
The research of TIG welding process possibilities to be used as hardfacing technology. [PDF]
The final master's project aim is to investigate the possibilities of applying the TIG method for hardfacing technology. To achieve the aim of the final master's project the analysis of the scientific publications was carried out, the resistant to ...
Šertvytis, Rolandas,
core +1 more source
Studi Lapisan Hasil Hardfacing Dengan Variasi Arus Dan Elektroda AWS A5.13 EFe2/A5.1 E7018 [PDF]
The current becomes a factor influencing the hardness value In the welding. The higher the welding current would affect the higher the hardness test results. If the current were used is low it will make it difficult to ignite the electric arc.
Rizchi Ayu Suryadewi +5 more
core +1 more source
Fracture toughness testing and toughening mechanisms of some commercial cobalt-free hardfacing alloys [PDF]
Hardfacing alloys are weld deposited to provide a wear resistant surface for structural base materials. Commercial low cobalt hardfacing alloys are being evaluated to reduce plant activation levels.
Cockeram, B.V.
core
Thin Surface Layers of Iron-Based Alloys Deposited by TIG Hardfacing
Hardfacing Layers Developed By Tungsten Inert Gas Surface Melting ...
Sakiru ADELEKE (2919683)
core +1 more source
This study investigates the influence of an austenitic buffer layer on the microstructure, hardness, and abrasive wear resistance of Fe–Cr–C hardfacing applied to high-chromium white cast iron (HCWCI) hammer tips used in sugarcane shredders.
Buntoeng Srikarun +4 more
doaj +1 more source
TBM (Full face rock tunnel boring machine) is a large tunnel excavation lining complete equipment which has been widely used in many practical fields. The main components of TBM rock breaking are the disc cutters.
Jiyu Tian +7 more
doaj +1 more source
Composite powder particles (CPP) preset on base metals were fused with a solid wire to form a melt by the intense heat provided by the arc. An X-ray diffractometer, scanning electron microscopy, and energy dispersive spectrometer were employed to ...
Huiwen Yao +4 more
doaj +1 more source
Advances in Materials Science and Engineering, Volume 2024, Issue 1, 2024.
Advances in Materials Science and Engineering
wiley +1 more source
Understanding the microstructural evolution of silicide-strengthened hardfacing steels
New powder-processed hardfacing Fe-based alloys are being developed to provide high wear and corrosion resistance in demanding pressurised water reactor environments.
D. Bowden, D. Stewart, M. Preuss
doaj +1 more source

