Results 301 to 310 of about 5,240,245 (344)
Some of the next articles are maybe not open access.
, 2020
High-strength low-alloy (HSLA) steels with a yield strength of 800 MPa and a thickness of 8 mm were subjected to laser welding to address the problem of loss of strength in the welded joint.
Chen Lian +6 more
semanticscholar +1 more source
High-strength low-alloy (HSLA) steels with a yield strength of 800 MPa and a thickness of 8 mm were subjected to laser welding to address the problem of loss of strength in the welded joint.
Chen Lian +6 more
semanticscholar +1 more source
Energy, 2020
This study discusses the effects of changes in the regeneration heat input on the dehumidification performance of a desiccant wheel to confirm its effective operation mode. The quantity of heat input to the regeneration air is assumed to change from 100%
D. A. Saputra +5 more
semanticscholar +1 more source
This study discusses the effects of changes in the regeneration heat input on the dehumidification performance of a desiccant wheel to confirm its effective operation mode. The quantity of heat input to the regeneration air is assumed to change from 100%
D. A. Saputra +5 more
semanticscholar +1 more source
Effect of finite heat input on the power performance of micro heat engines
Energy, 2011Micro heat engines have attracted considerable interest in recent years for their potential exploitation as micro power sources in microsystems and portable devices. Thermodynamic modeling can predict the theoretical performance that can be potentially achieved by micro heat engine designs.
Khu, Khu, Jiang, Liudi, Markvart, Tom
openaire +2 more sources
The influence of heat input on microstructure and porosity during laser cladding of Invar alloy
Optics and Laser Technology, 2019The Invar alloy coatings were prepared using laser cladding technology. The effects of heat input on the coatings size, microstructure and porosity of laser cladding layers were investigated by optical microscope (OM), scanning electron microscope (SEM ...
X. Zhan +4 more
semanticscholar +1 more source
Heat input, intermetallic compounds and mechanical properties of Al/steel cold metal transfer joints
Journal of Materials Processing Technology, 2019Cold metal transfer welding/brazing of AA5754 aluminum alloy and Q235 low carbon steel was performed in a lap joint configuration using an AlSi12 filler wire.
Jin Yang +5 more
semanticscholar +1 more source
Effect of equivalent heat input on WAAM Al-Si alloy
International Journal of Mechanical Sciences, 2022Chao Chen +4 more
semanticscholar +1 more source
International Journal of Pressure Vessels and Piping, 2019
Duplex stainless steels have excellent mechanical properties and corrosion resistance due to their austenitic/ferritic microstructure in equal phase fractions. This optimal phase ratio changes as a result of welding in the different zones of the weldment.
B. Varbai, T. Pickle, K. Májlinger
semanticscholar +1 more source
Duplex stainless steels have excellent mechanical properties and corrosion resistance due to their austenitic/ferritic microstructure in equal phase fractions. This optimal phase ratio changes as a result of welding in the different zones of the weldment.
B. Varbai, T. Pickle, K. Májlinger
semanticscholar +1 more source
Transactions of the Indian Institute of Metals, 2022
Muralimohan Cheepu +1 more
semanticscholar +1 more source
Muralimohan Cheepu +1 more
semanticscholar +1 more source
World Tribology Congress III, Volume 1, 2005
A method to predict the time evolution of temperature fields during the frictional welding of stainless steel bars is proposed. The features of the proposed method are the introduction of the heat input coefficient and the transfer of the heat generating plane proportional to the shortening of the work.
T.-T. Ikeshoji +3 more
openaire +1 more source
A method to predict the time evolution of temperature fields during the frictional welding of stainless steel bars is proposed. The features of the proposed method are the introduction of the heat input coefficient and the transfer of the heat generating plane proportional to the shortening of the work.
T.-T. Ikeshoji +3 more
openaire +1 more source