Results 41 to 50 of about 312 (172)
The 4R principle—Resilience, Repairability, Recyclability, and Renewability—enables sustainable liquid‐metal transistors. LM materials provide stretchable, damage‐tolerant architectures, allow rapid circuit repair, permit full material recovery through dissolution, and support renewable fabrication cycles, forming a closed‐loop pathway toward ...
Elahe Parvini, Abdollah Hajalilou
wiley +1 more source
Large‐Scale Hydrogen Storage: Surface and Subsurface Challenges
This review examines underground hydrogen storage with emphasis on the interaction between surface facilities and subsurface reservoirs. Variable renewable hydrogen requires compression, buffering, and purification before injection, while subsurface processes influence wellhead pressure, temperature, and composition.
Mostafa Montazeri +3 more
wiley +1 more source
Influence of acrylonitrile (ACN) content on the processing behavior and morphological development of PA/NBR thermoplastic vulcanizates. Torque‐time profiles, SEM, and SEM/AFM images show that an intermediate ACN level (38%) promotes improved phase dispersion and morphological uniformity, especially with increased processing time, resulting in the most ...
André Luís dos Santos da Silva +4 more
wiley +1 more source
Evaluation of the sealing performance of the packer rubber varies according to specific simulation models. This paper aims at revealing the difference between elastic and hyperelastic analyses using the finite element mothed (FEM). The study extracts the
Xuelin Dong, Zhiyin Duan
doaj +1 more source
Dynamic vulcanization at higher shear rates refines PA/NBR morphology, reduces domain size, and maintains mechanical performance after reprocessing. ABSTRACT Thermoplastic vulcanizates (TPVs) of polyamide 6 and nitrile butadiene rubber (PA/NBR) present excellent mechanical properties but traditionally suffer from performance loss during re‐melt ...
André Luís dos Santos da Silva +4 more
wiley +1 more source
Based on the integrated binder–CNT composite dispersion (IBC) solution, a high‐solids–content (77 wt%) slurry could be prepared. Using this slurry, an ultrahigh‐mass–loading cathode ( > 12 mAh/cm2) is demonstrated. The fabricated electrode showed a uniform CBD distribution from top to bottom, supporting the electrode's excellent mechanical properties ...
Jun Kyu Park +16 more
wiley +1 more source
A novel approach that integrates AI‐based methodology, laboratory experimentation, and field application experience to accurately predict the lifespan of elastomeric materials in harsh downhole environments. ABSTRACT This paper presents a physics‐driven neural network (PINN) model to capture the constitutive behavior, elongation at break (EAB), modulus,
Aref Ghaderi +6 more
wiley +1 more source
Rubber O‐rings are vital sealing components in petrochemical and refinery applications, where reliable performance under harsh conditions is essential. This study employs a multianalytical approach to investigate the material composition, curing system, and performance of an industrial O‐ring.
Soheila Lashgari +6 more
wiley +1 more source
Viscoelastic strain response of dielectric elastomer materials for artificial muscles
Dielectric elastomer actuators (DEAs) are promising candidates for artificial muscle systems due to their lightweight structure, large deformation capabilities, and rapid response to electrical stimulation.
Hans Liebscher +6 more
doaj +1 more source
This article explores a carrier‐type approach for the chemical prelithiation of silicon (Si) powder and investigates the integration of prelithiated silicon (LixSi) as electrolyte‐free anode in sulfide‐based all‐solid‐state batteries. In comparison to a Si anode, the LixSi anodes showed improved cycle stability at 2 C, but revealed kinetic limitations ...
Tobias Neumann +5 more
wiley +1 more source

