Results 271 to 280 of about 3,349,877 (335)
Some of the next articles are maybe not open access.
Archives of Civil and Mechanical Engineering, 2021
Fereshte Ghorbani, M. Emamy, H. Mirzadeh
semanticscholar +1 more source
Fereshte Ghorbani, M. Emamy, H. Mirzadeh
semanticscholar +1 more source
Proceedings of SPE Health, Safety and Environment in Oil and Gas Exploration and Production Conference, 1994
Abstract The 14 well Maui A (MPA) production platform supplies some 90% of New Zealand's gas and consequently any shut down is limited to only 10 hours by virtue of line pack. In 1990 further field development called for the installation of the Maui B platform producing through a multiphase pipeline to separation facilities on MPA.
openaire +1 more source
Abstract The 14 well Maui A (MPA) production platform supplies some 90% of New Zealand's gas and consequently any shut down is limited to only 10 hours by virtue of line pack. In 1990 further field development called for the installation of the Maui B platform producing through a multiphase pipeline to separation facilities on MPA.
openaire +1 more source
Fire prevention during hot work
Welding in the World, 2015This document addresses provisions to prevent loss of life and property from fire or explosions as a result of hot work and provides guidance for property owners and managers, supervisors, employees, and contractors who manage, supervise, and perform hot work. It does not address the health effects of working in high-temperature environments.
Steve Hedrick +2 more
openaire +1 more source
Alloy Digest, 1984
Abstract W.W. HOT WORK is a chromium-tungsten hot-work tool and die steel containing nominally 1.05% vanadium. It is characterized by high strength and hardness at elevated temperature and good resistance to heat checking. It has high hardenability and can be hardened by quenching in salt or oil.
openaire +1 more source
Abstract W.W. HOT WORK is a chromium-tungsten hot-work tool and die steel containing nominally 1.05% vanadium. It is characterized by high strength and hardness at elevated temperature and good resistance to heat checking. It has high hardenability and can be hardened by quenching in salt or oil.
openaire +1 more source
Electrical hot work safety program
IEEE Transactions on Industry Applications, 1988An internal review of the safety practices for a large Canadian chemical plant indicated that the established procedures for electrical hot work needed to be expanded and formalized. The practices were expanded into a comprehensive electrical hot work program that included the philosophy, control, qualification, and safe work methods.
J.M. Gallagher, L.B. McClung
openaire +1 more source
Hot Working Simulation by Hot Torsion Testing
2005Abstract This article summarizes the types of hot working simulation tests such as hot tension, compression, and torsion testing used in the assessment of workability. It illustrates the use of hot torsion testing for the optimization of hot working processes.
openaire +1 more source
Deformation mechanisms in hot working
JOM, 19681. During deformation at a constant temperature above 0.5Tm, there is a steady-state regime where both stress and strain rate remain constant independent of strain. 2. The interdependence of stress, strain rate and temperature during steady-state hot working and secondary creep are similar. 3.
openaire +1 more source