Results 181 to 190 of about 163,001 (214)
Some of the next articles are maybe not open access.
The Levitation Force Characteristics of Stacked HTS Tapes
2020 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD), 2020High temperature superconducting (HTS) tapes can be stacked into a block structure and be used in HTS magnetic levitation systems. This paper proposes a simulation method based on H-formulation to study the levitation force characteristics of the stacked HTS tapes on the permanent magnet guideways (PMG) in Comsol Multiphysics.
Jianhui Liang +3 more
openaire +1 more source
Levitation Force of Magnetized HTS Tape Stacks
IEEE Transactions on Applied Superconductivity, 2017High-temperature superconductors (HTS) have the significant potential of magnetic-force-based applications. Nowadays, wide spread of coated conductors tapes (CC-tapes) enables the use of HTS stacks in levitation applications. For the development of CC-tapes-based bearings and transportation systems, it is important to have information on stability of ...
Maxim Osipov +3 more
openaire +1 more source
Stresses and strains in multi-filament HTS tapes
IEEE Transactions on Appiled Superconductivity, 1999High temperature superconducting tapes are now commercially available for practical applications such as magnets and cables. However, still today the published data on strength and allowable deformation limits of these tapes are not altogether in agreement. Definitions and concepts with regards to the stresses and strains in HTS tapes under deformation
P. Skov-Hansen, Z. Han, J.I. Bech
openaire +1 more source
Comparison of Magnetic Systems with HTS Bulks and HTS Tape for Non-Contact Bearings
2020 21st International Symposium on Electrical Apparatus & Technologies (SIELA), 2020This study is aimed at the applying of 2G HTS tapes in the magnetic system of non-contact bearing. The levitation properties of HTS bulk and HTS tape are measured experimentally. The properties were used for modelling magnetic system with different HTS elements.
Ekaterina Kurbatova +2 more
openaire +1 more source
Comparison of Overcurrent Responses of 2G HTS Tapes
IEEE Transactions on Applied Superconductivity, 2016<p>In this paper, the comparison of transient responses of second-generation (2G) higherature superconducting (HTS) tapes under alternating overcurrent was presented. The authors performed the series of measurements of the SF4050 and SCS4050 HTS tapes produced by Superpower Co.
Czerwinski, Dariusz +4 more
openaire +1 more source
Reduction of Magnetization in Windings Composed of HTS Tapes
IEEE Transactions on Applied Superconductivity, 2012Methods to reduce the magnetization in windings composed of high temperature superconductor (HTS) tapes are presented on the basis of the abnormal transverse-field effect. The toroidal arrangement as well as the coaxial arrangement of additional coils wound with non-magnetic wires such as copper wires is effective to uniformize the distribution of ...
K. Kajikawa, K. Funaki
openaire +1 more source
Design of HTS Tape Characteristics Measurement System
IEEE Transactions on Appiled Superconductivity, 2004High temperature superconductor (HTS) tapes are now commercially available for practical applications to apply various purposes. However HTS tapes show different electrical and mechanical characteristics, according to the manufacturers who are trying to apply various fabrication processes and treatments. From the viewpoint of an application, it is very
J.-H. Joo +4 more
openaire +1 more source
Characteristics of an HTS Magnet Wound With 12-mm Zr-Doped HTS Tape
IEEE Transactions on Applied Superconductivity, 2014This paper examined the properties of an high-temperature superconducting (HTS) magnet, such as the Ic-B relation and critical current, with pancake windings of a 12-mm-wide Zr-doped HTS tape. Considering the width of the Zr-doped HTS tape was 12 mm, which was three times wider than that of a conventional 4 mm tape, the current distribution at the ...
null Myunghun Kang +3 more
openaire +1 more source
Characteristic Analysis of HTS Linear Synchronous Generators Designed With HTS Bulks and Tapes
IEEE Transactions on Applied Superconductivity, 2014Two types of high temperature superconducting (HTS) linear synchronous generators (LSG) have been analyzed, which models developed have either an HTS bulk magnet array or an HTS tape coil as their secondary mover. The no-load induced voltage and output power characteristics versus the trapped flux density of the HTS bulk magnets, the HTS tape coils ...
Zhi H. Wu, Jian X. Jin
openaire +1 more source