Results 171 to 180 of about 10,608 (305)

A Methodology to Integrate Closed‐Cycle Heat Pumps into Batch Distillation Columns

open access: yesChemie Ingenieur Technik, EarlyView.
Batch distillation often cannot use vapor recompression due to contamination risks in food and pharma. This study proposes a design for integrating closed‐loop heat pumps using natural fluids. Results show significant energy savings, offering a sustainable alternative to traditional setups.
Philipp Dorn   +5 more
wiley   +1 more source

The Influence of Operating Pressure Oscillations on the Machined Surface Topography in Abrasive Water Jet Machining. [PDF]

open access: yesMaterials (Basel)
Veljković DŽ   +5 more
europepmc   +1 more source

Waste activated sludge high‐rate treatment of septage: Biodegradability studies and contact phase trials towards a cleaner environment

open access: yesThe Canadian Journal of Chemical Engineering, EarlyView.
Abstract The waste activated sludge high‐rate (WASHR) process, developed in our previous study, is used for septic wastewater treatment. This high‐rate contact stabilization pre‐treatment uses typical waste streams found in wastewater treatment plants to reduce a portion of the loadings on the main treatment trains.
Arman Shirali   +2 more
wiley   +1 more source

Revisiting the synthesis of dimethyl carbonate from methanol and carbon dioxide

open access: yesThe Canadian Journal of Chemical Engineering, EarlyView.
Abstract The process for producing dimethyl carbonate (DMC) from carbon dioxide (CO2) and methanol is explored in this article. It provides an overview of the thermodynamics involved in DMC synthesis, discussing the challenges and potential solutions. The article highlights the reported use of catalysts and dehydrating agents to improve DMC yield and ...
Diego Alexander Santos Araque   +3 more
wiley   +1 more source

Spatially resolved 23Na magnetic resonance dispersion measurement in porous media

open access: yesThe Canadian Journal of Chemical Engineering, EarlyView.
Quantitative 23Na MRI was employed to analyze dispersion in realistic core plug samples and was compared with the conventional breakthrough curve. 23Na MRI provided a more effective aassessment of core plug heterogeneity than the conventional method. Abstract Tracer tests are widely used in the petroleum industry to assess reservoir core plugs, relying
Rheya Rajeev   +5 more
wiley   +1 more source

Experimental Study of Hydraulic Accumulator Discharge

open access: yes, 2018
This thesis aims to identify the behaviour of a 4 l hydraulic bladder accumulator undergoing discharge under various conditions and ultimately shed some light on irregularities that OneSubsea Processing is experiencing regarding rapid initial pressure reduction in one of their off-shore accumulator systems connected to a subsea multiphase pump with a ...
openaire   +1 more source

Home - About - Disclaimer - Privacy