Results 101 to 110 of about 1,642,916 (241)
Fluid flow through a single fracture is commonly described by the cubic law. However, deviations from this model are expected because natural fracture surfaces are rough and in contact with each other in discrete regions.
Chenghao Han +5 more
doaj +1 more source
Based on experimental results and theoretical analysis, an established rock damage accumulation model that comprehensively considers the preapplied static load, impact peak value, impact frequency, and impact times. Abstract To study the rock damage mechanism under high static loading and superimposed medium strain rate cyclic impact loading, a series ...
Wei Wang +6 more
wiley +1 more source
Experiments were conducted to study the behavior of the solid particles (proppant) inside the hydraulic fracture during the formation stimulation, and study the effect of the proppant concentration on the hydraulic fracturing process, which lead to ...
Mohammed Abdul Ameer, Samera Hamed Allah
doaj
Critical expansion points: Mechanical signs of surrounding rock instability
This study proposes the Rock Bearing‐Expansion Model (RockBEM) with critical expansion points (CEPs) to quantify post‐peak damage stages in deep‐buried rock masses via plane strain compression test (PSCT). CEP hysteresis&interval ratios reveal bearing performance dynamics and failure severity, advancing mechanistic insights into deep underground rock ...
Jiaqi Wen +4 more
wiley +1 more source
An optimizing microseismic method for rock burst early warning based on mining production process
A classification early warning method of rock burst based on hourly microseismic data is proposed, which can be combined with the on‐site production process to provide more timely warning. Abstract Microseismic (MS) events have been reported in nearly every coal mining country, which could well lead to rock burst in underground coal mines.
Zepeng Han +6 more
wiley +1 more source
Our study reveals that caving‐enhanced geothermal systems (C‐EGS) with adequately fractured reservoirs achieve optimal heat extraction by minimizing preferential flow paths, while conventional fracturing (F‐EGS) and pipe‐based (P‐EGS) systems suffer accelerated thermal drawdown.
Fangchao Kang +4 more
wiley +1 more source
This study examines energy evolution in rock rupture via triaxial direct shear tests, exploring the impact of confining pressure and temperature on fracture surface randomness. A novel energy‐based brittleness index is proposed, validated experimentally, and compared with existing methods for reliability and accuracy.
Biao Wang +5 more
wiley +1 more source
An experimental device for physical simulation of hydraulic fracturing, comprising: a load‐bearing mechanism with multiple interconnected plates that collectively form an sample chamber; a load‐generating mechanisms, with multiple load‐generating mechanisms arranged within the experimental chamber.
Delei Shang +5 more
wiley +1 more source
Hydraulic fracturing is the principal technical method about the generation of sophisticated fracture system in shale gas development; there are still significant challenges in enunciating the origination and extension of hydraulic fracture and ...
Daixin Deng +8 more
doaj +1 more source
Surface hydration‐induced damage in tight oil‐bearing sandy conglomerate reservoirs
A series of techniques such as X‐ray diffraction, scanning electron microscopy, energy‐dispersive spectroscopy, conductivity tests, and infrared thermal imaging were used. The key findings are the identification of a two‐stage surface hydration process and the elucidation of the effects of various minerals and elements on the hydration process ...
Anbang Zhao +5 more
wiley +1 more source

