Results 91 to 100 of about 20,193 (267)

Combined Effects of Thermal Cycling Aging and Reinforcement Content on the Ball‐On‐Disk Wear of Additively Manufactured Polylactic Acid Composites

Polymer Composites, Volume 47, Issue 21, Page 19085-19107, 10 November 2026.
Thermal Aging and Tribological Tests of Additive Manufactured PLA Composites. ABSTRACT This study focuses on the additive manufacturing of pure polylactic acid (PLA) specimens and milled glass fiber (GF)‐filled PLA composites under thermal cycling aging and wear tests. Wear tracks have been analyzed via 3D optical profiling and SEM imaging.
Sinan Fidan, Satılmış Ürgün, Nevin Gamze Karsli, Taner Yilmaz, Mustafa Özgür Bora, Mehmet İskender Özsoy   +5 more
wiley   +1 more source

Behavior of Injection‐Molded Nylon 6 Composites With Virgin and Field‐Exposed Waste‐Recycled Blends

Polymer Composites, Volume 47, Issue 21, Page 19382-19402, 10 November 2026.
Recycling field‐exposed Nylon 6 composites for sustainable secondary applications. ABSTRACT Every year, more than 18,600 metric tonnes of glass fiber‐reinforced Nylon 6 composite waste from sucker rod guides used in downhole oil and gas applications are landfilled due to uncertainty about retained performance after prolonged service exposure.
Chundu Gyem Tamang, Allan Manalo, Paulomi (Polly) Burey, Wahid Ferdous, Tristan Shelley, Mayur Patel, Tony Chapman   +6 more
wiley   +1 more source

Validation of dynamic hygrothermal simulation models for historical buildings: State of the art, research challenges and recommendations

, 2020
The proper simulation of the hygrothermal behaviour of historical buildings is a challenging task with several implications regarding the evaluation of indoor thermal comfort and the suitability of retrofit strategies that comply with the conservation of
H. E. Huerto-Cardenas, F. Leonforte, N. Aste, C. del Pero, G. Evola, V. Costanzo, E. Lucchi   +6 more
semanticscholar   +1 more source

Tufting‐Based Manufacturing Method for High‐Performance 3D Composite Lap Joints

Polymer Composites, Volume 47, Issue 21, Page 19851-19870, 10 November 2026.
Graphical abstract illustrating the manufacturing process of a tufted non‐crimp preform lap joint, fractographic characterisation and comparative mechanical performance evaluation. ABSTRACT This study presents a tufting‐enabled through‐thickness reinforcement approach for enhancing the performance of 3D composite lap joints manufactured using resin ...
J. Ahmed, T. Sharif, R. S. Choudhry, S. Z. H. Shah   +3 more
wiley   +1 more source

In-Situ hygrothermal evaluation of ventilation block as adaptive climate buffer in contemporary tropical house of Indonesia

ARTEKS : Jurnal Teknik Arsitektur
Within tropical urban environments, passive cooling strategies have become increasingly essential in mitigating the escalating energy consumption associated with achieving indoor thermal comfort.
Agung Murti Nugroho, Muhammad Nur Fajri Alfata, Andika Citraningrum, Wasiska Iyati, Fernanda Ayuning Putri   +4 more
doaj   +1 more source

Out‐of‐Plane Strain‐Decoupled Architecture for High‐Fill‐Factor Stretchable OLED Displays

Advanced Functional Materials, Volume 36, Issue 88, 2 November 2026.
A vertically decoupled multilayer SOLED architecture separates emissive pixel islands from deformable interconnects, allowing low‐modulus elastomeric layers to accommodate applied strain and suppress strain transfer to the OLED region. This design, combined with transparent hybrid encapsulation, enables a high fill factor (∼75%), stretchability ...
Young Hyun Son, Kyung Cheol Choi, Jeong Hyun Kwon   +2 more
wiley   +1 more source

Interface Engineering of Porous Transport Layer‐Catalyst Layer in Proton Exchange Membrane Water Electrolyzers: A Comprehensive Review

Advanced Materials Interfaces, Volume 13, Issue 21, 6 November 2026.
The PTL–CL interface plays a decisive role in PEMWE performance by governing electron conduction, water supply, oxygen removal, catalyst utilization, and interfacial stability. This review summarizes interface‐related resistance sources, characterization methods, and engineering strategies, highlighting rational PTL–CL interface design for low‐cost ...
Aobo Wan, Zhengkai Tu
wiley   +1 more source

Differential Quadrature Method for Bending Analysis of Asymmetric Circular Organic Solar Cells Resting on Kerr Foundation in Hygrothermal Environment

Mathematics
This article presents the first theoretical analysis of the bending behavior of circular organic solar cells (COSCs). The solar cell under investigation is built on a flexible Kerr foundation and has five layers of Al, P3HT:PCBM, PEDOT:PSS, ITO, and ...
Mohammad A. Abazid, Muneer Alali, Mohammed Sobhy   +2 more
doaj   +1 more source

Optimising Convolutional Neural Networks to Predict the Hygrothermal Performance of Building Components

Energies, 2019
Performing numerous simulations of a building component, for example to assess its hygrothermal performance with consideration of multiple uncertain input parameters, can easily become computationally inhibitive.
Astrid Tijskens, Hans Janssen, Staf Roels   +2 more
doaj   +1 more source

Sustainable and Seismically Resilient Confined Masonry: Global Progress in Research and Design Practice

Earthquake Spectra, Volume 42, Issue 4, November 2026.
Modern confined masonry (CM) construction consists of masonry walls confined by reinforced concrete (RC) tie‐columns and tie‐beams. When built correctly, CM buildings have shown good performance in earthquake's shaking. Even though CM construction has been practised for almost a century in some Latin American countries, its use and standardisation are ...
Ahsana Parammal Vatteri, Svetlana Brzev, Dina D’Ayala, Sergio M. Alcocer, Sebastian Kaminski, Vaibhav Singhal, Aidarbek Stamov, Anna Pavan, Daniel Quiun, Dexter Lo, Erwin Lim, Hemant B. Kaushik, Juan José Pérez‐Gavilán, Julian Thamboo, Mahdi Eghbali, Marcos M. Chávez, Qaisar Ali, Ramesh Guragain, Sofia Andrade, Tim Hart, Ulugbek Begaliev, Yunita Idris, Radu Vacareanu, Daniar Abdykalykov   +23 more
wiley   +1 more source