Impact toughness and fracture toughness of austempered ductile iron [PDF]
China Foundry, 2004 The impact toughness and fracture toughness ofaustermpered ductile iron (ADI) are described. The notched and un-notched charpy impact toughness of ADI at room temperature are somewhat lower than that of steel castings or forged steel pieces, however ...
Jingcheng LIU, Guoxiong SUN
doaj +1 more source
Study on impact toughness of TMCP and quenched and tempered high strength steels
Case Studies in Construction MaterialsIn this study, the effect of steel rolling technique, temperature, yield strength and welding heat input on the impact toughness of high-strength steels is studied. The impact toughness of five kinds of high strength steels with yield strength of 550 MPa,
Jin Jiang +4 more
doaj +2 more sources
Effect of pouring temperature on impact toughness on brass (Cu-Zn) through metal casting
Metalurgija, 2021 The purpose of this study is to investigate the impact toughness of brass (CuZn) with five variations of pouring temperature during the production of cast-samples through a metal casting process. Five variations of the pouring temperature are 1060, 1110,
Iqbal . +5 more
doaj +1 more source
Improvement of low-velocity impact and compression-after-impact performance by z-fibre pinning. [PDF]
, 2006 Z-fibre® pinning is a new method of through-thickness reinforcement of laminated composites. This paper presents an experimental test and theoretical analysis on how and why these pins can improve the resistance to impact loading and post- impact ...
X. Zhang +5 more
core +1 more source
Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure [PDF]
, 2013 This paper presents a validation of low-velocity impact Finite Element (FE) modelling. Based on switching ply location of reference layup [02,452,902,-452]s T700GC/M21 laminated plates from Bouvet et al.
Bouvet, Christophe +2 more
core +1 more source
Effect of delta ferrites on the anisotropy of impact toughness in martensitic heat-resistant steel
Journal of Materials Research and Technology, 2019 To avoid brittle failure of the final-stage turbine blades, it is necessary to understand the anisotropy mechanism in martensitic heat-resistant steel 10Cr12Ni3Mo2VN.
Junru Li +4 more
doaj +1 more source
, 2022 Owing to high density, concrete paving blocks (CPB) are highly brittle when subjected to occasional impact loads. Fractures in CPB create riding discomfort and increase maintenance costs.
Tirmazi, Syed Muhammad Talal +5 more
core +1 more source
About the impact behavior of woven-ply carbon fiber-reinforced thermoplastic- and thermosetting-composites: A comparative study [PDF]
, 2013 This study is aimed at comparing the response of TS-based (epoxy) and TP-based (PPS or PEEK) laminates subjected to low velocity impacts. C-scan inspections showed that impact led to diamond-shaped damage resulting from different failure mechanisms ...
Vieille, Benoit +5 more
core +1 more source
Effects of stitching on delamination of satin weave carbon-epoxy laminates under mode I, mode II and mixed-mode I/II loadings [PDF]
, 2010 The objective of the present study is to characterize the effect of modified chain stitching on the delamination growth under mixed-mode I/II loading conditions.
Trabelsi, Walid +2 more
core +1 more source
Causes of scatter in high rate fracture testing of polymers [PDF]
, 2013 A method based on the measurement of failure time is being developed by the European Structural Integrity Society to determine high rate fracture toughness of polymers.
Horsfall I. +3 more
core +1 more source