Results 91 to 100 of about 114,728,006 (313)

Enhancing Fatigue Crack Growth Resistance in Heterostructured Aluminum Bimetals by Tailored Interface Design

Advanced Engineering Materials, EarlyView.
Different Al/Al bimetals with a single engineered interface reveal how mechanical mismatch governs fatigue crack growth under cyclic loading. Additionally, loading–unloading–reloading tests link the microyielding behavior to the fatigue crack growth resistance, while crack‐path analysis reveals toughening mechanisms at the interface, highlighting ...
Sebastian Vollath, Philip Manuel Pohl, Heinz Werner Höppel   +2 more
wiley   +1 more source

In-situ stress solution theory for borehole overcoring technique incorporating time-dependent effect of stress relief and its applications

International Journal of Mining Science and Technology
In-situ stress is a key parameter for underground mine design and rock stability analysis. The borehole overcoring technique is widely used for in-situ stress measurement, but the rheological recovery deformation of rocks after stress relief introduces ...
Daohong Xia, Shengjun Miao, Lianjun Chen, Yuan Li, Zejing Liu, Rongmin Zhang, Pengjin Yang, Pengcheng Li   +7 more
doaj   +1 more source

A Review of In-situ Stress Measurement Techniques

, 2018
2018 Coal Operators Conference; University of Wollongong; 2018-02-07 - 2018-02 ...
Lin, H, Oh, J, Masoumi, H, Canbulat, I, zhang, C, Dou, L   +5 more
openaire   +2 more sources

Distinct Microstructural Characteristic Lengths Defining Notch Fatigue Crack Initiation and Propagation, and Defect Tolerance in Advanced Steels

Advanced Engineering Materials, EarlyView.
Schematic representation of modes of microcrack nucleation, growth and temporary arrestment at different boundaries, with the criteria for crack propagation in three scenarios: (1) large notch, (2) defect/small sharp notch, and (3) long crack. This work revisits and integrates results on the fatigue behavior of advanced bainitic steels (in particular ...
Lucia Morales‐Rivas
wiley   +1 more source

Microstructure Modification of Additively Manufactured Mo–9Si–8B by Annealing and Its Effects on High‐Temperature Mechanical Properties

Advanced Engineering Materials, EarlyView.
Postbuild annealing systematically modifies the phase fractions and morphology of EB‐PBF processed Mo–9Si–8B. Quantitative microstructure–property correlations reveal how controlled phase evolution enhances high‐temperature compressive strength and creep resistance.
Christopher Schmidt, Yong Chen, Georg Hasemann, Benjamin Wahlmann, Carolin Körner, Manja Krüger   +5 more
wiley   +1 more source

Uniform Amorphization of Crystalline Silicon Surfaces Enabled by Deep Ultraviolet Femtosecond Laser Pulses

Advanced Engineering Materials, EarlyView.
Deep‐UV (258 nm) femtosecond pulses enable uniform amorphous silicon writing on Si(100)/(111) with a six‐fold larger fluence amorphization window than NIR methods. Optimized fluence and overlap yield 20–45 nm uniform and continuous amorphous layers. Microscopy shows sharp interfaces, and real‐time reflectivity reveals nanosecond melt–resolidification ...
Wissal Benali, Magali Gregoire, Matys Guyard, Tatiana Itina, David Grojo, Pol Sopeña   +5 more
wiley   +1 more source

In Situ Stress Measurement and Field Inversion in Deep Surrounding Rock

Mathematics
The in situ stress state of deep surrounding rock is critically important for mine safety and resource extraction. This study focuses on a lead–zinc mine in Yunnan Province, China, with the objective of characterizing the distribution of the deep in situ
Zhilou Feng, Qifeng Guo, Meifeng Cai, Siying Wu, Qingwen Yan, Xianquan Lei, Fei Li   +6 more
doaj   +1 more source

Superlubricity and Corrosion Inhibition Properties of Solvate Ionic Liquids in Hybrid Carbon Fiber Reinforced Plastic–Steel Interfaces

Advanced Engineering Materials, EarlyView.
Solvate ionic liquids lubrication reduced the coefficient of friction by ∼60% compared to dry sliding, reaching steady‐state values as low as 0.04–0.05. Corrosion weight‐loss measurements in 1 M HCl further demonstrated significant inhibition behavior, with only 100 ppm of [Li(G3)][TFSI] (∼68.5 μL/L) reducing corrosion‐product weight loss by 63 ...
Sameh Dabees, Timothy Harte, Bhagya Dharmasiri, Y. Athulya Wickramasingha, David J. Hayne, Daniel J. Eyckens, Luke C. Henderson   +6 more
wiley   +1 more source

Design and calibration of a new triaxial strain cell for rock stress measurement.

, 2006
The present paper describes the technical characteristics and first laboratory calibration tests of a new Triaxial Strain Cell (TSC) -with re-usable components - conceived for low cost measurement of the 3D state of stress in rock mass through borehole ...
Cravero M, Iabichino G, Gullì D
core  

Adaptive Foam 3D Printing of Ultralight and Multifunctional Materials

Advanced Engineering Materials, EarlyView.
Adaptive foam 3D printing, enabled by expandable microspheres, imparts cellular structures to thermoplastic and thermosetting polymers, manufactured through a variety of processes including fused filament fabrication, direct ink writing, digital light processing, and inkjet printing.
Nariman Rajabifar, Amir Ameli
wiley   +1 more source