Results 1 to 10 of about 2,810 (118)
Crashworthiness Performance of Bamboo-Inspired 3D-Printed Tubes: Effects of Infill Pattern, Infill Ratio, Wall Thickness, and Inner Diameter [PDF]
BiomimeticsThis study investigates the impact absorption performance of bamboo-inspired 3D-printed circular tubes in terms of infill type (grid, gyroid, honeycomb, Archimedean chords), infill ratio (10%, 20%, 30%, and 40%), wall thickness (0.8, 1.2, 1.6, and 2.0 mm)
Emre İsa Albak
doaj +2 more sources
In-Plane Cyclic Response of Separated Masonry Infill Walls Using Polymeric Materials at the Surrounding Steel Frames Interface Using 3D FE Analysis [PDF]
Journal of Rehabilitation in Civil Engineering, 2023 Masonry infill walls are commonly used as partitions and exterior walls in many countries. Generally, the masonry wall is executed without any gap from the frame, which leads to the interaction between the structural frame and the infill wall ...
Alireza Karkabadi +1 more
doaj +1 more source
Applied Sciences, 2022 The bundled lipped channel–concrete (BLC-C) composite wall structure is a new structure with several advantages such as a high bearing capacity and good seismic performance.
Pengyun Cheng +5 more
doaj +1 more source
Research on the Seismic Performance of Straw Panel-Infilled Concrete Frame by Shaking Table Test
Advances in Civil Engineering, 2021 Infill wall-frame interaction-induced damage and failure have been found in many previous earthquakes due to the inappropriate estimation of the stiffness of infill walls.
Jia Zhu, Yuling Bian, Aiping Zhou
doaj +1 more source
Nonlinear modeling of the infill wall based on the brittle cracking model [PDF]
Numerical Methods in Civil Engineering, 2017 :This paper introduces a new numerical method for the analysis of infilled steel frames with hollow clay blocks. This approach is based on the brittle cracking model of ABAQUS.
A. Keyvani Borujeni, T. Mahdi
doaj +1 more source
Buildings, 2021 Traditional Chinese wood residences consist of timber frames with masonry infill walls or other types of infill, representing valuable heritage. A field investigation of traditional village dwellings in northern China consisting of timber frames with mud
Yinlan Shen +5 more
doaj +1 more source
Progressive Collapse Resistance Analysis of Precast Concrete Frames with Infill Walls
Shanghai Jiaotong Daxue xuebao, 2021 The infill wall has a significant influence on the progressive collapse resistance of the precast concrete (PC) frame, and there is no corresponding design method at present.
ZHANG Jingbo, YANG Jian, WANG Feiliang
doaj +1 more source
In-plane effect on out-of-plane capacity of separated infill wall [PDF]
Numerical Methods in Civil Engineering, 2018 In this paper, by using a finite element model, the in-plane drift effect on the out-of-plane behavior of the infilled frame with weak infill walls has been calculated.
A. Keyvani Borujeni, T. Mahdi
doaj +1 more source
Advances in Civil Engineering, 2020 This study presents a finite element model to investigate the bidirectional seismic behavior of masonry infill walls. The test data are utilized to verify the numerical model.
Xiaomin Wang +3 more
doaj +1 more source
Numerical Simulation of the Blast Resistance of SPUA Retrofitted CMU Masonry Walls
Buildings, 2023 Through numerical simulation, the blast-resistant performance of spray polyurea elastomer (SPUA) retrofitted concrete masonry unit (CMU) masonry infill walls under far-range blast loading was studied.
Yi Zhang +4 more
doaj +1 more source