Results 11 to 20 of about 8,477,906 (276)
Axial developments of interfacial area and void concentration profiles in subcooled boiling flow of water [PDF]
Axial developments of the local void fraction, interfacial area concentration and bubble Sauter mean diameter were measured in subcooled boiling flow of water in a vertical internally heated annulus using the double-sensor conductivity probe technique.
Hyun-Sik Park +2 more
exaly +6 more sources
Effect of Electrolyte Concentration on Bubble Size and Gas-Liquid Interfacial Area in Bubble Column
The optimum conditions of bubble column would be the ones that enhance mass transfer and this is accomplished by maximizing gas-liquid interfacial area. In the present work the effect of electrolyte concentration (aqueous solution of sodium chloride NaCl
Farah T. Jassem
doaj +3 more sources
Prediction of interfacial area concentration based on interpretable neural network
BackgroundInterfacial area concentration (IAC) is a key parameter of the interface transfer term in the closed two-fluid model of two-phase flow, which characterizes the strength of the gas-liquid interface transport capacity.
ZHOU Yuhao +5 more
doaj +2 more sources
Abstract Accurate predictions of interfacial area concentration (IAC) are required for closure of the condensation phase change term. The interfacial area transport equation (IATE) can dynamically predict interfacial area concentration and is increasingly being used in the benchmarking of phase change flows over static based correlations which ...
exaly +3 more sources
The gas-liquid two-phase flow widely exists in nuclear energy, chemical industry, petroleum engineering, and other industrial production fields. Two-phase flow will occur in pressurized water reactors during normal operation and accident conditions.
REN Jiaxing, WANG Ruohao, WANG Fangdong, QIAO Shouxu, TAN Sichao, TIAN Ruifeng, GAO Puzhen
doaj +2 more sources
The interfacial area concentration (IAC) is of vital importance in determining the interfacial transfer terms of mass, momentum, and energy between phases in the two-fluid model.
Longxiang Zhu +4 more
doaj +1 more source
Data-Driven-Based Forecasting of Two-Phase Flow Parameters in Rectangular Channel
In the current nuclear reactor system analysis codes, the interfacial area concentration and void fraction are mainly obtained through empirical relations based on different flow regime maps.
Qingyu Huang +6 more
doaj +1 more source
Interfaces and interfacial effects in glass reinforced thermoplastics - Keynote Presentation [PDF]
Optimization of the fibre-matrix interphase region is critical to achieving the required performance level in thermoplastic matrix composites. Due to its initial location on the fibre surface, the sizing layer is an important component in the formation ...
Thomason, J.L.
core +3 more sources
The reduction stripping kinetics of Ce4+ by HEH/EHP was studied by a constant interfacial area cell with laminar flow. The effects of stirring speed, temperature, specific interfacial area, Ce4+ concentration in the organic phase, free extractant ...
Jingui He +3 more
doaj +1 more source
For predicting the void fraction distribution in subcooled flow boiling, it is necessary to measure the interfacial heat transfer coefficient—which determines the amount of condensation rate of vapor bubble—with high accuracy.
Noriaki INABA +2 more
doaj +1 more source

