Results 51 to 60 of about 215 (160)
New Power Balance Equations for Modelling Electric Arc Furnace
‐ Proposing two new power balance equations which consider both arc radius and length. ‐ Proposing four new EAF models. ‐ Time varying characteristics of the model are preserved as model parameters change every half cycle. ‐ Like the actual cases, the time variations are non‐stationary as different ARMA models are selected at every run of the models. ‐
Zahra Babaei +2 more
wiley +1 more source
Research on Vibration and Noise of Converter Transformer Based on LCL Converter
The paper outlines the topology of the new LCL converter. Through theoretical analysis and experimental verification, it has been confirmed that the proposed LCL converter not only effectively sup‐presses harmonics but also significantly reduces the vibration and noise of the converter transformers.
Liang Zhao +5 more
wiley +1 more source
This paper proposes an effective detection method for insulated gate bipolar transistor (IGBT) open‐circuit faults in multiple modular multilevel converters (MMCs) working in inverter and rectifier modes. This fault detection uses segmental structure and is composed of the fault monitoring and fault confirmation.
Zhengkui Zhao, Minxiao Han
wiley +1 more source
Effect of Rectangular Voltage Fluctuations on Currents of Single-Phase Induction Motors
Various power quality disturbances commonly occur in a power system, including voltage fluctuations. These can be analysed as simultaneous occurrences of voltage subharmonics and interharmonics of various frequencies – components of frequency less than ...
Marcin Pepliński, Piotr Gnaciński
doaj +1 more source
Line commutated converter (LCC) has been widely applied in hybrid high voltage direct current (HVDC) transmission system, where the modular multilevel converter (MMC) is applied as receiving end and may induce low order harmonics in DC-link voltage ...
He Huang +5 more
doaj +1 more source
Impedance‐Based Adaptive Droop Control for Islanded AC Microgrids and Overview
Recent improvements in the application of distributed energy resources (DERs) and microgrids (MGs) have made controlling these resources very important. However, there are still many challenges in this field. One of the anticipated challenges in islanded MGs (IMGs) is the mismatched output impedance of DERs, which affects the volt‐var regulation ...
Forough Qashqaie +4 more
wiley +1 more source
In grid‐connected smart distribution systems, the prediction and mitigation of flicker caused by harmonics and interharmonics present a significant challenge for stable grid operation, particularly in the presence of distributed renewable energy sources (DRESs).
Shree Ram Senthil Subramani +2 more
wiley +1 more source
In the steel industry, electric arc furnaces (EAFs) are essential for metal scrap recycling. However, they are known for their high reactive power consumption, negatively impacting power quality (PQ). The static VAR compensator (SVC) is the reactive power compensation device that provides the best cost‐benefit relation for mitigating the impact of EAFs.
J. Marulanda-Durango +3 more
wiley +1 more source
The effects of harmonics, interharmonics, and subharmonics on low-voltage distribution networks, leading to a deterioration in electrical power quality, have become more evident in recent years.
Germán Martínez-Navarro +3 more
doaj +1 more source
The cross‐correlation technique was used in this study to recover the complex, aperiodic, asymmetric, and non‐linear properties of the signals during cross‐country faults with high impedance fault syndrome. Due to its reduced sensitivity to background fluctuations, a given change may not affect all of the component peaks.
Pampa Sinha +6 more
wiley +1 more source

