Results 121 to 130 of about 3,241 (168)
Some of the next articles are maybe not open access.
A Method for Improving Torque Performances of IPMSM
2020 8th International Conference on Power Electronics Systems and Applications (PESA), 2020This paper presents a method for improving torque performances by shifting magnets and optimal flux-barrier shape in Interior Permanent Magnet Synchronous Machine (IPMSM), in which cogging torque and torque ripple are significantly reduced together, while average torque is preserved.
Jianan Dong +3 more
openaire +1 more source
Overload Considerations for Design and Operation of IPMSMs
IEEE Transactions on Energy Conversion, 2010Although interior permanent magnet synchronous machines and their cooling are designed to match the rated power, power demands other than rated may arise. One may keep the same machine dimensions and basic electromagnetic design, but increase the cooling for different operating conditions.
Abdul Rehman Tariq +2 more
openaire +1 more source
This paper reports the optimal control problem on the interior permanent magnet synchronous motor (IPMSM) systems. The control performance of the traditional model predictive control (MPC) controller is ruined due to the parameter uncertainty and ...
Guojun Tan, Jie Meng
exaly +2 more sources
Current Sensorless MTPA for IPMSM Drives
IEEE/ASME Transactions on Mechatronics, 2017In this paper, a maximum torque per ampere (MTPA) control strategy is presented for interior permanent magnet synchronous machines (IPMSMs) without current sensing or regulation. The developed control scheme achieves MTPA using a direct voltage control method, which varies the machine's stator voltage amplitude and angle.
Hicham Chaoui +2 more
openaire +1 more source
A reduction method of cogging torque for IPMSM
2005 International Conference on Electrical Machines and Systems, 2005This paper describes a reduction technique of the cogging torque in an interior permanent magnet synchronous motor (IPMSM). IPMSM usually has the flux barrier for preventing the short circuit of magnetic flux near the magnet. The flux barrier can reduce the cogging torque, and therefore the shape of the flux barrier of IPMSM with concentrated winding ...
Y. Kawaguchi +3 more
openaire +1 more source
An Improved Rotor Cooling Structure of IPMSM
2019 22nd International Conference on Electrical Machines and Systems (ICEMS), 2019For the interior permanent magnet synchronous machine, the rotor temperature at the axial center is high because of its low axial thermal conductivity. The conventional the rotor structure with axial and radial vent holes has low air velocity in the axial center position, so the cooling performance for the rotor is unsatisfactory.
Ming Kang +4 more
openaire +1 more source
A new magnetic matrix model of IPMSM
IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society, 2010Interior Permanent Magnet Synchronous Motor(IPMSM) is used for wide applications because of its large torque density and high efficiency. However, IPMSM has large space harmonics and strong magnetic nonlinearity. The establishment of the dynamic characteristic analysis technique is required to examine control techniques to high performance and high ...
Hiroki Goto +2 more
openaire +1 more source
IPMSM Using Permalloy and Bond Magnet
2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2020This paper proposes an interior permanent magnet synchronous motor (IPMSM) with new rotor structure. It can extend the high-speed range. By using two types of permanent magnets with different coercive forces appropriately, the magnetic flux of permanent magnet linked to the stator can be further reduced during the flux-weakening control.
Junya Tamaki +2 more
openaire +1 more source
The precision inductance estimation of IPMSM for vehicles
2012 IEEE Vehicle Power and Propulsion Conference, 2012The inductance of IPMSM was calculated using a Direct Current Test(DCT) and Current Vector Control Test (CVCT). The CVCT has advantages related to the current phase angle, and does not require separate experiment equipment. However, large error at current phase angles of 0° and 90° is generated.
null Gyu-Won Cho +2 more
openaire +1 more source
Nonlinear backstepping design of IPMSM controller
2007 International Conference on Electrical Machines and Systems (ICEMS), 2007This paper presents a speed controller for an interior permanent magnet synchronous motor (IPMSM) based on adaptive backstepping method. By using the nonlinear model of IPMSM and backstepping method, the Lyapunov functions are constructed in order to enable the system to have uniformly asymptotic stability and unperturbed controller is designed ...
null Wang Limei +2 more
openaire +1 more source

