Results 31 to 40 of about 7,128 (261)

Comparison of Double Jersey Knitted Fabrics Made of Regenerated Cellulose Conventional and Unconventional Yarns

Tekstilec, 2022
The development of new spinning technologies has produced cheaper yarns and with it, research into the production and application of woven and knitted fabrics from unconventional yarns.
Dragana Kopitar, Zeljka Pavlovic, Zenun Skenderi, Zlatko Vrljicak   +3 more
doaj   +1 more source

The Comfort Properties of Two Differential-Shrinkage Polyester Warp Knitted Fabrics

AUTEX Research Journal, 2016
Single-layered warp knitted fabrics were produced by the 60D/36F (containing 36 filaments) polyester yarn with differential shrinkage (DS) property in this study.
Chen Qing, Miao Xuhong, Mao Haiwen, Ma Pibo, Jiang Gaoming   +4 more
doaj   +1 more source

Low‐Angle Grain Boundaries and Re‐Segregation in Single‐Crystalline Ni‐Base Superalloys

Advanced Engineering Materials, EarlyView.
This work demonstrates that Re‐segregation at low‐angle grain boundaries (LAGBs) in Ni‐base superalloys is influenced by misorientation angle. Advanced microscopy and atom probe tomography reveal that higher misorientation angles increases Re‐segregation.
Alireza B. Parsa, Aparna Saksena, Alesander Kostka, Pascal Thome, Felicitas Scholz, Alexandre Mussi, Christoph Somsen, Baptiste Gault, Jan Frenzel, Gunther Eggeler   +9 more
wiley   +1 more source

Creep Properties and Deformation Mechanism of Additively Manufactured NiAl‐CrMo Composites

Advanced Engineering Materials, EarlyView.
Additively manufactured NiAl‐CrMo composites contain numerous interfaces and cell boundaries that control their creep response. At 700°C under high applied stress, creep is dominated by dislocation‐controlled power‐law mechanisms. At 800°C–900°C and lower stresses, creep is primarily diffusion‐controlled along cell boundaries.
Jan Vollhüter, Andreas Bezold, Johan Westraadt, Katharina Fiegl, Subham Chattoraj, Benjamin Wahlmann, Carolin Körner, Michael Mills, Mathias Göken, Steffen Neumeier   +9 more
wiley   +1 more source

An experimental study on the improvement of functionality of knitted composite for mattress [PDF]

MATEC Web of Conferences, 2019
The comfort and performance of textile products used as mattress covers is analyzed in terms of physical characteristics, so air permeability and whiteness are investigated for different knitted assemblies with different compositions.
Dinu Milena, Coman Diana
doaj   +1 more source

Texoskeletons: Developing the Fundamental Technologies for Creating Intelligent Soft Robotic Clothing With Integrated 1D Sensors and Actuators

Advanced Functional Materials, EarlyView.
ABSTRACT Traditional wearable exoskeletons rely on rigid structures, which limit comfort, flexibility, and everyday usability. This work introduces the fundamental technologies to create the first soft, lightweight, intelligent textile‐based exoskeletons (Texoskeletons) built using 1D sensors and actuators.
Amy Lukomiak, Rameesh Bulathsinghala, Jack Varga, Shuxin Meng, Kalana Marasinghe, Imaad Refai, Biyon Fernando, Amitkumar Patel, Chamika M. Halloluwa‐Arachchige, Carlos Oliveira, Arash M. Shahidi, Zahra Rahemtulla, Alexander Turner, Ziyun Ding, Bernard X. W. Liew, Andy Kerr, Ezio Preatoni, Theo Hughes‐Riley, Ishara Dharmasena, Pasindu Lugoda   +19 more
wiley   +1 more source

EFFECT OF YARN STRUCTURE ON MECHANICAL PROPERTIES OF SINGLE JERSEY FABRICS [PDF]

Annals of the University of Oradea: Fascicle of Textiles, Leatherwork, 2018
Knitted fabrics are known to more complex and dimensionally sensitive structures than the woven fabrics. Variations in material, structural, mechanical processing and finishing parameters are bound to significantly influence the mechanical and comfort ...
SUBRAMANIAN Kathirvelu
doaj  

INFLUENCE OF LOOP POSITION IN WARP-KNITTED PLAIN STITCHES ON STRUCTURAL PROPERTIES OF KNITTED FABRICS

AUTEX Research Journal, 2004
This paper presents the structure of a new group of warp-knitted interlock stitches. Thedifference between them and generally-known warp-knitted stitches is emphasised.
Kopias Kazimierz, Pinar Anna
doaj   +1 more source

Aerodynamic Effects of Knitted Wire Meshes—CFD Simulations of the Flow Field and Influence on the Flow Separation of a Backward-Facing Ramp

Fluids, 2022
Passive flow control techniques are needed to reduce flow separation and enhance aerodynamic performance. In this work, the effect of a knitted wire mesh on the flow separation of a backward-facing ramp was numerically investigated for a Reynolds number ...
Jan Hauke Harmening, Harish Devananthan, Franz-Josef Peitzmann, Bettar Ould el Moctar   +3 more
doaj   +1 more source

3D Printing Innovations in Polymeric Porous and Patterned Architecture

Advanced Functional Materials, EarlyView.
Polymeric foams occupy a unique structural space between dense solids and open networks, where engineered void fraction governs mechanical compliance, thermal resistance, and mass transport. Additive manufacturing now enables precise spatial control over cellular architecture, unlocking designer foam structures across applications spanning crash ...
Dhanush Patil, Sri Vaishnavi Thummalapalli, Clarissa Westover, Arunachalam Ramanathan, M. Taylor Sobzcak, Roumika Patil, Qixuan Xiang, Tiantian Li, Sui Yang, Timothy E. Long, Hongyue Sun, Xianqiao Wang, Yang Liu, Kenan Song   +13 more
wiley   +1 more source