Results 51 to 60 of about 37,702 (312)
AUTEX Research Journal, 2017 The present study examined the physical properties related to the intelligent coolness characteristics including the wearing comfort of Huvis elastic fiber (HEF) knitted fabrics.
Ah Kim Hyun, Kim Seung Jin
doaj +1 more source
Tekstilec, 2022 The development of new spinning technologies has produced cheaper yarns and with it, research into the production and application of woven and knitted fabrics from unconventional yarns.
Dragana Kopitar +3 more
doaj +1 more source
The Comfort Properties of Two Differential-Shrinkage Polyester Warp Knitted Fabrics
AUTEX Research Journal, 2016 Single-layered warp knitted fabrics were produced by the 60D/36F (containing 36 filaments) polyester yarn with differential shrinkage (DS) property in this study.
Chen Qing +4 more
doaj +1 more source
, 2020 In this work, nine bi-layer knitted samples with varied knitting structures and made up of different yarn compositions were fabricated, and their thermal comfort properties were investigated. The thermal comfort properties were evaluated by breathability,
Yang Yang +3 more
semanticscholar +1 more source
Low‐Angle Grain Boundaries and Re‐Segregation in Single‐Crystalline Ni‐Base Superalloys
Advanced Engineering Materials, EarlyView.This work demonstrates that Re‐segregation at low‐angle grain boundaries (LAGBs) in Ni‐base superalloys is influenced by misorientation angle. Advanced microscopy and atom probe tomography reveal that higher misorientation angles increases Re‐segregation.
Alireza B. Parsa +9 more
wiley +1 more source
Creep Properties and Deformation Mechanism of Additively Manufactured NiAl‐CrMo Composites
Advanced Engineering Materials, EarlyView.Additively manufactured NiAl‐CrMo composites contain numerous interfaces and cell boundaries that control their creep response. At 700°C under high applied stress, creep is dominated by dislocation‐controlled power‐law mechanisms. At 800°C–900°C and lower stresses, creep is primarily diffusion‐controlled along cell boundaries.
Jan Vollhüter +9 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.During creep of a single‐crystal Ni‐based superalloy, the overall crystal orientation is observed to remain constant while the microstructure evolves. Despite the lack of macroscopic rotation, small (<1°) rotations are observed on the submicron size scale and are accommodated by counteracting rotations over the scale of several micrometers.
E. J. Payton +3 more
wiley +1 more source
EFFECT OF YARN STRUCTURE ON MECHANICAL PROPERTIES OF SINGLE JERSEY FABRICS [PDF]
Annals of the University of Oradea: Fascicle of Textiles, Leatherwork, 2018 Knitted fabrics are known to more complex and dimensionally sensitive structures than the woven fabrics. Variations in material, structural, mechanical processing and finishing parameters are bound to significantly influence the mechanical and comfort ...
SUBRAMANIAN Kathirvelu
doaj
AUTEX Research Journal, 2004 This paper presents the structure of a new group of warp-knitted interlock stitches. Thedifference between them and generally-known warp-knitted stitches is emphasised.
Kopias Kazimierz, Pinar Anna
doaj +1 more source
An experimental study on the improvement of functionality of knitted composite for mattress [PDF]
MATEC Web of Conferences, 2019 The comfort and performance of textile products used as mattress covers is analyzed in terms of physical characteristics, so air permeability and whiteness are investigated for different knitted assemblies with different compositions.
Dinu Milena, Coman Diana
doaj +1 more source