Results 81 to 90 of about 1,597 (257)
BioResources, 2012 In this study, the bending strength and stiffness of laminated veneer lumber (LVL) produced from beech (Fagus orientalis L.), poplar (Populus x euramericana I-214), and eucalyptus (Eucalyptus grandis W.
Bekir Cihad Bal,, İbrahim Bektaş
doaj
Evaluation of Mechanical Properties of Reinforced Poplar Laminated Veneer Lumber
BioResources, 2015 Three types of reinforcement materials, a carbon fiber-reinforced polymer (CFRP) sheet, a glass fiber-reinforced polymer (GFRP) mesh, and a composite of the CFRP sheet and GFRP mesh, were used to reinforce poplar laminated veneer lumber (LVL), and the ...
Jie Wang +4 more
doaj +1 more source
Free Vibrations of Sustainable Laminated Veneer Lumber Slabs
, 2023 In this paper, the results of dynamic laboratory tests of four laminated veneer lumber (LVL) slabs of different thicknesses, widths, and types were presented. In three of the tested slabs, LVL with all veneers glued lengthwise was used (LVL R).
Łukasz Polus +3 more
core +1 more source
Energy Science &Engineering, EarlyView.Three flat‐plate collectors with spiral and square coiled riser tubes were tested and it was found that the spiral type provides the best results with a thermal efficiency of 66.98% for a mass flow rate of 0.4 kg/min. Riser tube geometry is a key factor in optimizing flat‐plate collector output.
Sakhail Islam Biaz +4 more
wiley +1 more source
Timber roof structure for outdoor auditorium in Parque Paraiso, San Blas (Madrid)
, 2009 p. 468-475A timber shell structure is designed to provide covering for an outdoor auditorium in Madrid (Spain). The covering comprises five independent overlapped marquees with similar shape but diverse dimensions.
CORBAL, Jesus J. +2 more
core
Fire and Materials, EarlyView.ABSTRACT This study addresses the influence of fibre architecture on the mechanical properties of vacuum‐infused glass fibre reinforced polymer (GFRP) composites at elevated temperatures (ET). Laminates with three different fibre configurations—unidirectional (UD), bidirectional 0°/90° cross‐ply (BD), and ±45° off‐axis angle‐ply (OA) – were tested in ...
Eloísa Castilho +4 more
wiley +1 more source
Influence of veneer lathe checks on the mechanical properties of LVL [PDF]
, 2015 Laminated veneer lumber (LVL) is a high-performance engineered wood product made of several wood veneers bound together mostly in grain direction. Veneers are obtained thanks to peeling process.
COTTIN, Fabrice +4 more
core
Char Layer Thickness Evolution During Structural Timber Fire Experiment and Final Density Profile
Fire and Materials, EarlyView.ABSTRACT This paper evaluates several non‐destructive experimental methods for determining the char layer thickness and its density profile in structural timber samples exposed to standard ISO 834 fire curve experiments. Microwave echo pulse, ultrasonic echo pulse, X‐ray computed tomography, and resistance drilling were evaluated.
Fernando Pérez Pérez +4 more
wiley +1 more source
Les, 2017 The aim of the research was to define and develop a wooden composite with a thin cross-section and which could be used as reinforcement material in oversized wooden window profiles. An additional limitation was to bond the composite at room temperature.
Jaša Saražin +3 more
doaj +1 more source
Fire and Materials, EarlyView.ABSTRACT Heat induced delamination (HID) is a phenomenon in engineered wood products which may result in the detachment of the bonded timber lamellae before charring propagates to the bond line interphase. This study aims to correlate the thermal degradation of two 1‐c‐polyurethane adhesives at the microscale to the thermo‐hydro‐mechanical behaviour of
A. Čolić +4 more
wiley +1 more source