Results 61 to 70 of about 154,848 (294)
Impact of laser beam shaping on weld pool and seam geometry in butt-joint welding with filler wire
IOP Conference Series: Materials Science and Engineering, 2023 Abstract Beam shaping offers a promising solution to address various challenges in laser-based processes. This study explores the use of an adaptive beam shaping solution using a deformable mirror for high-power continuous wave lasers. Specifically, the impact of three different elliptical beam shapes on weld pool geometry, weld cross ...
Y Mi +6 more
openaire +1 more source
Advanced Engineering Materials, EarlyView.Thermomechanical fatigue tests of laser beam powder bed fusion (PBF‐LB) Inconel 718 show that the additively manufactured material reaches almost the lifetimes of conventionally‐rolled material under no‐dwell conditions. Introducing dwell times at the maximum temperature markedly reduces the lifetimes due to pronounced grain boundary sliding associated
Stefan Guth +6 more
wiley +1 more source
Journal of Materials Research and Technology, 2023 304 austenitic stainless steel with a thickness of 7.5 mm was welded by high-power fiber laser welding. The effects of main welding parameters, including laser power, welding speed, and defocusing amount, on weld formation were studied in detail.
Peikang Tao +3 more
doaj +1 more source
A comparison between single sided and double sided friction stir welded 8mm thick DH36 steel plate [PDF]
, 2012 As part of an ongoing process to fully evaluate the potential for friction stir welding (FSW) to be used in the shipbuilding industry, a comparison has been made between two variants of the process.
Cater, Stephen R. +3 more
core
Effect of Laser Deoxidation on Adhesive‐Bonded Aluminum in an Oxygen‐Free Atmosphere
Advanced Engineering Materials, EarlyView.This study investigates laser ablation of aluminum under oxygen‐free conditions. The goal is to produce oxide‐free substrates that enable improved adhesive bonding with epoxy. Optimized laser parameters (90% overlap, 300 µJ) combined with oxide‐free substrates result in the highest tensile strength of the adhesive bond.
Sandra Gerland +5 more
wiley +1 more source
Materials & Design, 2019 In multi-layer welding, the interaction between the weld beads had a great impact on the performance of the overall joint. Therefore, experimental research and thermal-plastic analysis of 316L stainless steel multi-layer hybrid laser-arc welding were ...
Lin Chen +3 more
doaj +1 more source
Possible explanations for different surface quality in laser cutting with 1 micron and 10 microns beams [PDF]
, 2012 In laser cutting of thick steel sheets, quality difference is observed between cut surfaces obtained with 1 micron and 10 micron laser beams. This paper investigates physical mechanisms for this interesting and important problem of the wavelength ...
Golubev V. S. +10 more
core +6 more sources
Thermophysical Properties of the Desulphurization Slags With Various CaS and CaO/Al2O3 Ratio
Advanced Engineering Materials, EarlyView.This article investigates how CaS content and the CaO/Al2O3 ratio influence the thermophysical properties of desulphurization slags. Using experimental measurements and thermodynamic simulations, this study reveals complex effects on viscosity, surface tension, and density, providing new insight into slag structure and phase behavior under ...
Eldar Salpagarov +4 more
wiley +1 more source
Hanjie xuebaoTo address the strength-toughness mismatch in ultra-high strength steel welded joints, a step-cooling process inspired by the Quenching and Partitioning (Q&P) principle was proposed and its impact on the mechanical properties of welded joints was ...
Zhiyong ZHANG +6 more
doaj +1 more source
Metals, 2021 Laser welding experiments involving amorphous thermoplastic polymer (PMMA) and 304 austenitic stainless steel plates were conducted to explore the influence of laser welding process parameters on plastic–metal joints.
Yijie Huang +3 more
doaj +1 more source