Results 91 to 100 of about 4,804,166 (194)

A Practical Noise2Noise Denoising Pipeline for High‐Throughput Raman Spectroscopy

open access: yesAdvanced Engineering Materials, EarlyView.
A lightweight and reproducible denoising pipeline for high‐throughput Raman spectroscopy is introduced, based on a 1D convolutional autoencoder trained with a Noise2Noise strategy. Using only repeated short‐exposure acquisitions, the method suppresses stochastic noise without reference spectra, enabling reliable spectral reconstruction while preserving
David Martin‐Calle   +5 more
wiley   +1 more source

Investigating the Effect of Inclination Angle and the Influence of Scan Parameters on the Appearance and Thermal and Mechanical Properties of Filigree Tension Rods of LPBF‐Manufactured NiTi Shape‐Memory Alloys

open access: yesAdvanced Engineering Materials, EarlyView.
This article investigates the dependence of the properties on the manufacturing orientation in the form of the inclination angle to the build plate of LPBF‐fabricated NiTi rods with a diameter of 150–220 µm. Metallographic, chemical, thermal, and mechanical characterization show behavior under identical manufacturing conditions that ranges from ...
Sandra Herzig   +2 more
wiley   +1 more source

Three-dimensional characterization of modifications in sapphire exposed to laser-induced damage using multimodal spectral microimaging

open access: yesScientific Reports
Sapphire (Al2O3) is a commonly used dielectric material with many applications in lasers and optical systems. Owing to its high resistivity to laser induced damage, it is particularly suitable for use in high power laser systems.
Raymond P. McBride   +3 more
doaj   +1 more source

Microstructure‑Dependent Phase Transformations Under High‑Pressure Laser Heating in Additively Manufactured AlCrFe2Ni2

open access: yesAdvanced Engineering Materials, EarlyView.
Additively manufactured AlCrFe2Ni2 with contrasting BCC/B2‐dominant and lamellar FCC + BCC/B2 microstructures exhibits the same pressure‐induced BCC/B2 → HCP transformation. Under laser heating at high pressure, HCP is destabilized, and a cubic BCC/B2 + FCC assemblage is recovered, while the lower‐scan‐speed microstructure transforms at a lower ...
Raimundas Sereika   +5 more
wiley   +1 more source

Observation of the shock wave propagation induced by a high-power laser irradiation into an epoxy material [PDF]

open access: yes, 2014
The propagation of laser-induced shock waves in a transparent epoxy sample is investigated by optical shadowgraphy. The shock waves are generated by a focused laser (3 ns pulse duration—1.2 to 3.4TWcm−2) producing pressure from 44 to 98.9 GPa.
ESCAULT, Romain   +7 more
core   +1 more source

Laser-induced fluorescence Detector for Array Capillary Flow Systems

open access: yes, 2008
Laser-induced fluorescence Detector for Array Capillary Flow ...
陈士恒, 徐静, 熊艳, 关亚风
core  

Photodynamic therapy of prostate cancer by means of 5-aminolevulinic acid-induced protoporphyrin IX - In vivo experiments on the dunning rat tumor model [PDF]

open access: yes, 2004
Objective: In order to expand the use of photodynamic therapy (PDT) in the treatment of prostate carcinoma (PCA), the aim of this study was to evaluate PDT by means of 5-aminolevulinic acid (5-ALA)-induced protoporphyrin IX ( PPIX) in an in vivo tumor ...
Schneede, Peter   +12 more
core   +1 more source

Dual confocal laser-induced fluorescence/moveable contactless

open access: yes, 2009
A new dual simultaneous detector was developed for capillary electrophoresis microchip. Confocal laser-induced fluorescence (LIF) and moveable contactless conductivity detection (MCCD) were combined together for the first time.
申峰, 康琦, 杨萌, 于泳, Yong Yu
core  

CO2‐to‐CO Conversion in a Gas‐Fed, Zero‐Gap, PEM Electrolyzer Enabled by Polycations and Nitrogen‐Doped Carbon‐Supported Cobalt Nanoparticles

open access: yesAdvanced Functional Materials, EarlyView.
A gas‐fed, zero‐gap, PEM CO2 electrolyzer is realized by incorporating PDDA+ ions onto the carbonaceous Co/N‐C electrocatalyst, with gaseous H2 and CO2 fed into the anode and cathode, respectively. Operating without an aqueous electrolyte, the system sustains a peak FECO of 65.1% at 100 mA cm−2. ABSTRACT Electrochemical carbon dioxide reduction (ECO2R)
Yuen Leong Chow   +6 more
wiley   +1 more source

High‐Efficiency Deep Blue Single‐Gaussian Europium(II) Emitters and Their Emitter‐Host Interactions

open access: yesAdvanced Functional Materials, EarlyView.
Crown‐ether ligands and carborate anions enable vacuum‐processable Eu(II) emitters with efficient single‐Gaussian deep‐blue luminescence. Combined photophysical and computational analyses reveal that excited‐electron confinement and steric shielding of the europium center jointly govern compatibility with OLED host materials, establishing molecular ...
Mahmoud Soleimani   +8 more
wiley   +1 more source

Home - About - Disclaimer - Privacy