Results 131 to 140 of about 70,192 (249)
ABSTRACT Mechanical properties are a critical performance metric for many high explosive (HE) materials and tensile strength properties are particularly important. Direct tensile measurements using dogbone shaped samples are the gold standard but they have the disadvantage that they are fairly large and require samples machined from billets.
Paul B. Mirkarimi
wiley +1 more source
Roughness Measurements at Small and Uneven Surfaces of Ceramic Foam Filters
ABSTRACT This study investigated the possibility of roughness characterization of ceramic foam filters using a laser scanning microscope, examining the influence of magnification, measured area, cutoff wavelength (λc), measured roughness parameter, and position within the ceramic foam on the measured roughness data. Firstly, the effect of magnification
Claudia Voigt +3 more
wiley +1 more source
USING OF LASER-INTERFERENTIAL METHODS FOR ANALYSIS THE STRAIN-STRESS STATE OF CONCRETE SLEEPERS
The article is dealt with the results of research of the reinforced concrete element by means of the laser interferometry method.
O. H. Kesariiskyi +2 more
doaj
Calibration of Accelerometers by Shock Excitation and Laser Interferometry
A signal processing method for determining the dynamic behavior of accelerometers by shock excitation and laser interferometry is presented. The method allows the shock sensitivity and the magnitude and phase lag of the complex sensitivity of ...
Alfred Link, Hans-Jüurgen von Martens
doaj +1 more source
Screen‐printed mesoporous carbon perovskite solar cells offer an accessible route to scalable green energy. This study investigates the impact of dust particle contamination during the manufacture of this type of solar cell. Results suggest clean rooms may be unnecessary if strict cleanliness is maintained during storage and printing processes in ...
Kathryn Lacey +8 more
wiley +1 more source
Hyperspectral tomographic diffractive microscopy: Development and applications
Abstract Tomographic Diffractive Microscopy (TDM) provides label‐free three‐dimensional imaging of transparent samples with resolution surpassing confocal limits. At IRIMAS, successive instrumental developments since 2009 have enhanced TDM capabilities through transmission, reflection, isotropic, polarisation‐sensitive, and dual‐view configurations ...
Leonardo Pestana Legori +4 more
wiley +1 more source
Solar Plasma Noise in TianQin Laser Propagation: An Extreme Case and Statistical Analysis
TianQin (TQ) proposes to detect gravitational-wave signals by using laser interferometry. However, the laser propagation effect introduces a potential noise factor for TQ.
Yanan Liu +4 more
doaj +1 more source
Abstract Background and Objectives Daratumumab, a therapeutic human anti‐CD38 monoclonal antibody, improves multiple myeloma outcomes but interferes with pre‐transfusion testing by binding CD38 on reagent red blood cells (RBCs), potentially masking clinically significant alloantibodies.
Arnaud Reggiani +30 more
wiley +1 more source
Peixe Zircon as a Quality Control Reference Material in U‐Pb Geochronology by LA‐ICP‐MS
Key Points Peixe#0 zircon was characterised for U‐Pb geochronology using CA‐ID‐TIMS, SIMS and a long‐term LA‐ICP‐MS data set. The consistent results establish Peixe#0 as a reference material for U‐Pb quality control. Trace element heterogeneity requires careful, CL‐guided spot selection.
Margareth Sugano Navarro +7 more
wiley +1 more source
Abstract The Surface Water and Ocean Topography (SWOT) mission promises quasi‐global monitoring of glacial lakes, yet the elevation difference arising from its Ka‐band radar penetrating lake snow/ice cover remains unquantified. This poses a challenge to assessing their level changes.
Shuangxiao Luo +4 more
wiley +1 more source

