Results 101 to 110 of about 1,231,806 (179)

Effect of different surface treatments on the roughness of porcelain layer for all ceramic restoration.

Erbil Dental Journal, 2023
Background: porcelain layered zirconia restoration fractures are serious and create an aesthetic and functional dilemma for the patients and the dentist.
Maryam Jawad Challo, Shatha Abdulla Salih   +1 more
doaj  

Impact of monomer contamination of isopropanol during post‐rinsing on the accuracy of dental models fabricated by vat photopolymerization

Journal of Prosthodontics, EarlyView.
Abstract Purpose The aim of this study was to investigate the impact of an increasing level of monomer contamination of isopropanol (isopropyl alcohol [IPA]) during post‐rinsing on the dimensional stability of test samples produced by vat photopolymerization.
Florian Flierl, Benedikt C. Spies, Severin Rothlauf, Kirstin Vach, Ralf J. Kohal, Jörg Lüchtenborg   +5 more
wiley   +1 more source

Comparison of surface treatment protocols for a 3D‐printable resin for definitive crowns: Effects on surface roughness and bonding performance

Journal of Prosthodontics, EarlyView.
Abstract Purpose This study aimed to compare the effects of surface treatment protocols on the surface roughness and shear bond strength (SBS) of a three‐dimensional (3D)‐printable resin for definitive crowns. Materials and Methods A 3D‐printable resin for definitive crowns (Saremco Print Crowntec) was used to produce 168 specimens (10 × 10 × 2 mm3 ...
Engin Sacu, Mehmet Can Ararat, Sinan Fidan, Satılmış Ürgün, Mustafa Özgür Bora, Neslihan Tekce   +5 more
wiley   +1 more source

Does treatment‐induced surface roughness of 3 mol% yttria‐stabilized tetragonal zirconia polycrystals influence the wear of opposing restorative materials? An in vitro study

Journal of Prosthodontics, EarlyView.
Abstract Purpose This study aimed to investigate whether different surface treatments applied to 3 mol% yttria‐stabilized tetragonal zirconia polycrystals (3Y‐TZP), with comparable mean roughness (Ra) values, result in comparable values of additional surface roughness parameters, and to evaluate the influence of zirconia surface topography on vertical ...
Aline Stieper, Sebastian Wille, Matthias Kern, Maximiliane Amelie Schlenz, Hans‐Jürgen Wenz   +4 more
wiley   +1 more source

Combined Effects of Thermal Cycling Aging and Reinforcement Content on the Ball‐On‐Disk Wear of Additively Manufactured Polylactic Acid Composites

Polymer Composites, Volume 47, Issue 21, Page 19085-19107, 10 November 2026.
Thermal Aging and Tribological Tests of Additive Manufactured PLA Composites. ABSTRACT This study focuses on the additive manufacturing of pure polylactic acid (PLA) specimens and milled glass fiber (GF)‐filled PLA composites under thermal cycling aging and wear tests. Wear tracks have been analyzed via 3D optical profiling and SEM imaging.
Sinan Fidan, Satılmış Ürgün, Nevin Gamze Karsli, Taner Yilmaz, Mustafa Özgür Bora, Mehmet İskender Özsoy   +5 more
wiley   +1 more source

The influence of position in overlap joints of Mg and Al alloys on microstructure and hardness of laser welds [PDF]

, 2013
Structure and properties of laser beam welding zone of dissimilar materials, AZ31 magnesium alloy and A5754 Aluminum alloy, are investigated. The microstructure and quality of the Mg/Al weld were studied by metallography, microhardness and optical ...
BANNOUR, Sana, MASSE, Jean-Eric, AUTRIC, Michel, K. Abderrazak, ABDERRAZAK, Kamel, J. E. Masse, H. Mhiri, S. Bannour, MATTEI, Simone, S. Mattei, M. Autric, MHIRI, Hatem   +11 more
core   +1 more source

Adaptive Foam 3D Printing of Ultralight and Multifunctional Materials

Advanced Engineering Materials, Volume 28, Issue 21, 4 November 2026.
Adaptive foam 3D printing, enabled by expandable microspheres, imparts cellular structures to thermoplastic and thermosetting polymers, manufactured through a variety of processes including fused filament fabrication, direct ink writing, digital light processing, and inkjet printing.
Nariman Rajabifar, Amir Ameli
wiley   +1 more source

Laser-Assisted Surface Modification of Additively Manufactured WC-10Co Tools

Applied Sciences
Tungsten carbide and cobalt cutting tools require low surface roughness to improve cutting performance by reducing the wear from machining friction. While this is achieved by conventional manufacturing processes (pressing and sintering, grinding), with ...
Gonçalo Oliveira, Patrícia Freitas Rodrigues, Maria Teresa Vieira   +2 more
doaj   +1 more source

Out‐of‐Plane Strain‐Decoupled Architecture for High‐Fill‐Factor Stretchable OLED Displays

Advanced Functional Materials, Volume 36, Issue 88, 2 November 2026.
A vertically decoupled multilayer SOLED architecture separates emissive pixel islands from deformable interconnects, allowing low‐modulus elastomeric layers to accommodate applied strain and suppress strain transfer to the OLED region. This design, combined with transparent hybrid encapsulation, enables a high fill factor (∼75%), stretchability ...
Young Hyun Son, Kyung Cheol Choi, Jeong Hyun Kwon   +2 more
wiley   +1 more source

Onsite Characterisation of Composite Laterite Blocks by Using Novel Sensing Technologies—An Experimental Approach

Materials Proceedings
Testing on physical equivalents of mining blocks under controlled conditions offers reduced research costs and improved experiment repeatability. In this study, specimens consisting of ore, waste aggregates, and cement as binder are fabricated to ...
Basileios Deligiorgis, Declan Vogt, Ferenc Mádai, Michael Galetakis   +3 more
doaj   +1 more source