Results 71 to 80 of about 68,370 (266)
Li-rich oxides are considered as promising candidate cathode materials for high-energy Li-ion batteries due to their high specific capacity. However, the widespread adoption of Li-rich materials is hindered because of the lack of a stable surface ...
Chaochao Fu +7 more
doaj +1 more source
Author Correction: Quantification of the Li-ion diffusion over an interface coating in all-solid-state batteries via NMR measurements. [PDF]
Liu M +8 more
europepmc +1 more source
Modular Critical Element Recycling Platform Using a Nanoporous Additively Manufactured Gyroid
A modular recycling platform integrates 3D‐printed nanoporous gyroid structures to enable efficient critical element recovery. This system utilizes a hierarchical architecture, combining macroscopic channels with polymerization‐induced nanoscale porosity. By systematically tuning structural wall thickness and resin formulation, the platform achieves an
Xiangyu Gao +6 more
wiley +1 more source
Scandium (Sc)‐doped AlCoCrFeMo HEA coatings are fabricated via flame spraying with 0.1, 0.3, and 0.5 wt% Sc additions. Among these, the HEA‐Sc0.3 coating exhibits the highest corrosion resistance, indicated by a more positive corrosion potential and lower current density.
Pankaj Kumar +7 more
wiley +1 more source
Quantification of the Li-ion diffusion over an interface coating in all-solid-state batteries via NMR measurements. [PDF]
Liu M +8 more
europepmc +1 more source
Synthesis and Li-Ion Diffusion Studies of Li6Hf2O7 As Solid-State Electrolyte for Li-Ion Batteries
Development of safe Li-ion batteries with high operating voltages and enhanced capacities is the keystone for the development of high energy density demand in emerging technologies such as the electric car. Current Li-ion batteries involve the use of flammable organic solvents as liquid electrolytes for Li-ions diffusion between the electrodes. These
Amores, M., Cussen, E.J., Corr, S.A.
openaire +2 more sources
Low‐voltage FIB‐SEM tomography combined with a image preprocessing pipeline improves phase contrast and enables reliable machine‐learning segmentation of conductive networks in lithium‐ion battery electrodes. Structural descriptors are extracted from segmented images, done semimanually and automated, and compared.
Lisa Beran +6 more
wiley +1 more source
Deep‐UV (258 nm) femtosecond pulses enable uniform amorphous silicon writing on Si(100)/(111) with a six‐fold larger fluence amorphization window than NIR methods. Optimized fluence and overlap yield 20–45 nm uniform and continuous amorphous layers. Microscopy shows sharp interfaces, and real‐time reflectivity reveals nanosecond melt–resolidification ...
Wissal Benali +5 more
wiley +1 more source
Solvate ionic liquids lubrication reduced the coefficient of friction by ∼60% compared to dry sliding, reaching steady‐state values as low as 0.04–0.05. Corrosion weight‐loss measurements in 1 M HCl further demonstrated significant inhibition behavior, with only 100 ppm of [Li(G3)][TFSI] (∼68.5 μL/L) reducing corrosion‐product weight loss by 63 ...
Sameh Dabees +6 more
wiley +1 more source
Tin Monooxide Monolayer as Promising Anode Materials for Recharge Ion Batteries
Using density functional theory, Li, Na and Mg adsorption and diffusion on a SnO monolayer were investigated. The energetically favored adsorption sites and diffusion paths for Li, Na and Mg were determined.
Aijian Huang, Xiaoli Sun, Sha Dong
doaj +1 more source

