Results 81 to 90 of about 3,955 (251)
Deep‐UV (258 nm) femtosecond pulses enable uniform amorphous silicon writing on Si(100)/(111) with a six‐fold larger fluence amorphization window than NIR methods. Optimized fluence and overlap yield 20–45 nm uniform and continuous amorphous layers. Microscopy shows sharp interfaces, and real‐time reflectivity reveals nanosecond melt–resolidification ...
Wissal Benali +5 more
wiley +1 more source
Verification and Research on the Vapor Pressure of Mixed LiCl-CaCl2 Solution
The vapor pressure of desiccant solution is one of the most important parameter of liquid desiccant cooling system. It dominates the performance of this system.
Zhu Zhengyuan, Yao Ye
doaj
Solvate ionic liquids lubrication reduced the coefficient of friction by ∼60% compared to dry sliding, reaching steady‐state values as low as 0.04–0.05. Corrosion weight‐loss measurements in 1 M HCl further demonstrated significant inhibition behavior, with only 100 ppm of [Li(G3)][TFSI] (∼68.5 μL/L) reducing corrosion‐product weight loss by 63 ...
Sameh Dabees +6 more
wiley +1 more source
Experimental Investigation on Liquid Desiccant Regeneration
A regeneration tower with honeycomb paper to be its packed material was developed. Experiments were conducted to investigate the influence of air flow, solution temperature and height of packed material on its regeneration performance with the fixed inlet air states, solution concentration and flow rate.
Chen Ying, Zhang Yongquan, Shi Baoxin
openaire +1 more source
Enhancing Low‐Temperature Performance of Sodium‐Ion Batteries via Anion‐Solvent Interactions
DOL is introduced into electrolytes as a co‐solvent, increasing slat solubility, ion conductivity, and the de‐solvent process, and forming an anion‐rich solvent shell due to its high interaction with anion. With the above virtues, the batteries using this electrolyte exhibit excellent cycling stability at low temperatures. Abstract Sodium‐ion batteries
Cheng Zheng +7 more
wiley +1 more source
Experimental Investigation on the Performance of Heat and Mass Transfer of Cross-flow Dehumidifier
To describe the heat and mass transfer performance of the cross-flow dehumidifier, this paper measures the dehumidifier’s moisture removal rate and dehumidifier effectiveness on the test bed with liquid desiccant evaporative cooling air-conditioning ...
Qian Junfei, Yin Yonggao, Zhang Xiaosong
doaj
Energy and Exergy Analysis of LiBr-aq and LiCl-aq Liquid Desiccant Dehumidification System
In this study, energy and exergy analysis of experimental results obtained from a dehumidification system using LiBr-aq (lithium bromide-water) and LiCl-aq (lithium chloride-water) as desiccant was made.
Barış Kavasoğullari +2 more
doaj
Laser‐Induced Graphene from Waste Almond Shells
Almond shells, an abundant agricultural by‐product, are repurposed to create a fully bioderived almond shell/chitosan composite (ASC) degradable in soil. ASC is converted into laser‐induced graphene (LIG) by laser scribing and proposed as a substrate for transient electronics.
Yulia Steksova +9 more
wiley +1 more source
In the hollow-fiber-membrane-based liquid desiccant air dehumidification process, water vapor can permeate through the membrane effectively, while the liquid desiccant droplets are prevented from crossover.
Yin Shaoyou, Zhang Ning
doaj
Biomass Native Structure Into Functional Carbon‐Based Catalysts for Fenton‐Like Reactions
This study indicates that eight biomasses with 2D flaky and 1D acicular structures influence surface O types, morphology, defects, N doping, sp2 C, and Co nanoparticles loading in three series of carbon, N‐doped carbon, and cobalt/graphitic carbon. This work identifies how these structural factors impact catalytic pathways, enhancing selective electron
Wenjie Tian +7 more
wiley +1 more source

