Results 61 to 70 of about 21,302,986 (280)

Low temperature impact toughness of structural steel welds with different welding processes

open access: yesKSCE Journal of Civil Engineering, 2015
Influence of welding process and welding consumable on the impact toughness at low temperatures of the Heat Affected Zone (HAZ) and the weld metal in a structural steel weldment was investigated. A comparison of the low temperature impact toughness was made between the welded joints fabricated by Shielded Metal Arc Welding (SMAW) and Flux Cored Arc ...
Hyun-Seop Shin   +4 more
openaire   +1 more source

Mechanical property inhomogeneity and temperature effects in thick titanium alloy plates

open access: yesJournal of Materials Research and Technology
A comprehensive understanding of the inhomogeneity in mechanical property of thick titanium alloy plates is crucial for improving the service performance of deep-sea equipment.
Qizhen Ren   +7 more
doaj   +1 more source

Thermal Cycle–Microstructure–Property Relationships in Rail Steel Heat‐Affected Zone Simulated by Gleeble

open access: yesAdvanced Engineering Materials, EarlyView.
Microstructural evolution of premium rail steel during flash butt welding (FBW), comparing physically simulated heat‐affected zones with actual weld regions. Thermal cycles induce phase transformations and microstructural heterogeneity that influence weld quality and mechanical performance. These findings provide insights into optimizing FBW parameters
Emmanoelle Cintra da Cunha Araújo   +15 more
wiley   +1 more source

Microstructural Evolution and In Situ Formation of TiB and TiC in Ti─5Al─2.5Sn Alloy Processed by Powder Metallurgy

open access: yesAdvanced Engineering Materials, EarlyView.
Accelerated in situ formation of TiB and TiC in Ti–5Al–2.5Sn–B4C is driven by transient liquid phase formation, which enhances particle reactions and microstructural evolution. This process increases hardness and establishes a coupled relationship between sintering temperature and reinforcement content, strongly influencing porosity in the resulting ...
Fernando. Y. Kojima, Juliano. Soyama
wiley   +1 more source

TiN-containing high-heat-input welding steels: Optimizing Ti/N ratio and precipitation temperature for enhanced low-temperature impact toughness in coarse-grained heat-affected zones

open access: yesJournal of Materials Research and Technology
To enhance the low-temperature impact toughness of the coarse-grained heat-affected zone (CGHAZ) in high-heat-input welding steels, TiN-containing steels with tailored Ti and N contents were designed.
Junjie Hao   +5 more
doaj   +1 more source

Microstructural, Mechanical, and Textural Evolution of Dissimilar Combination of Laser‐Welded Maraging Steel and 4340 Steel

open access: yesAdvanced Engineering Materials, EarlyView.
The present work reports the microstructural, mechanical, and texture evolution of a dissimilar combination laser‐welded maraging steel with 4340 steel. This is important for aerospace applications. The demand for dissimilar welding is growing rapidly with the requirement of efficient and durable joints.
Bharat Behl   +3 more
wiley   +1 more source

Influence of equal-channel angular extrusion on impact toughness of aluminum and brass at room and low temperatures [PDF]

open access: yesInternational Journal of Mechanical and Materials Engineering, 2014
Abstract Background Equal-channel angular extrusion is a severe plastic deformation process that can be used for grain refinement to improve material properties of bulk metals. In this paper, the effect of equal-channel angular extrusion on the impact toughness of aluminum 1100 and brass C26000 was investigated.
Wang, Jyhwen   +3 more
openaire   +1 more source

Cryogenic toughness in a low-cost austenitic steel

open access: yes, 2021
At low temperatures most metals show reduced ductility and impact toughness. Here, we report a compositionally lean, fine-grained Fe-30Mn-0.11C austenitic steel that breaks this rule, exhibiting an increase in strength, elongation and Charpy impact ...
Zhang, Yubin   +15 more
core   +1 more source

Effect of Post-Weld Heat Treatment on -20℃ Impact Toughness of Heat Affected Coarse Grain Zone of Steel 07MnCrMoVR

open access: yesTeshugang, 2020
The microstructure and properties of the heat affected coarse grain zone of steel 07MnCrMoVR with post¬weld heat treated at 460 ~ 660 °C for 2 h are analyzed by means of optical microscope, scanning microscope, transmission electron microscope and impact
冯路路, 乔文玮, 鲁修宇, 周峰
doaj  

Advances in Sustainable and Wearable Textile Based Soft Robotics

open access: yesAdvanced Functional Materials, EarlyView.
This Review examines advances in wearable textile‐based soft robotics, focusing on sustainable materials, integrated sensing, and scalable actuation. It discusses manufacturing and system integration across healthcare, assistive robotics, prosthetics, and human–machine interfaces, and highlights key challenges in circular design, including life‐cycle ...
Zahir Abbas   +6 more
wiley   +1 more source

Home - About - Disclaimer - Privacy