Results 231 to 240 of about 20,127 (254)
Some of the next articles are maybe not open access.
Materials Science Forum, 2020
The paper deals with the impact toughness and fracture mode of the low-alloy 09G2S steel in the as-delivered state and in the condition after equal-channel angular pressing (ECAP) and annealing at impact bending in the temperature range of 293-203 [K]. The results on impact toughnessKCVand fracture mode of Charpy test specimens made of the 09G2S steel ...
A.M. Ivanov, E.S. Alexandrova
openaire +1 more source
The paper deals with the impact toughness and fracture mode of the low-alloy 09G2S steel in the as-delivered state and in the condition after equal-channel angular pressing (ECAP) and annealing at impact bending in the temperature range of 293-203 [K]. The results on impact toughnessKCVand fracture mode of Charpy test specimens made of the 09G2S steel ...
A.M. Ivanov, E.S. Alexandrova
openaire +1 more source
Acta Mechanica, 2020
zbMATH Open Web Interface contents unavailable due to conflicting licenses.
Victor E. Panin +2 more
openaire +2 more sources
zbMATH Open Web Interface contents unavailable due to conflicting licenses.
Victor E. Panin +2 more
openaire +2 more sources
Enhanced Low-Temperature Impact Toughness of Ultra-Fine Grained SiCp/ZL108 Composites
Materials Science Forum, 2012A new strategy for increasing the low-temperature toughness of structural materials is in urgent need for overcoming the general rheotropic brittleness in coarse-grain state. Here, a unique phenomenon was observed that ultra-fine-grained (UFG) SiCp/ZL108 composites after severe plastic deformation (SPD) exhibit higher impact toughness at temperatures ...
Jing Hua Jiang +7 more
openaire +1 more source
Impact Toughness of Q460 Frw for Building Structure at Low Temperature
SSRN Electronic Journal, 2022zhiming wang +6 more
openaire +1 more source
Materials & Design, 2012
High-ductility ductile iron was alloyed with 0–1.8 wt% Ni in this paper. The low-temperature impact toughness test and corrosion test of simulated seawater static whole-soaking were conducted to re ...
Yufu Sun +5 more
openaire +1 more source
High-ductility ductile iron was alloyed with 0–1.8 wt% Ni in this paper. The low-temperature impact toughness test and corrosion test of simulated seawater static whole-soaking were conducted to re ...
Yufu Sun +5 more
openaire +1 more source
steel research international
Machine learning (ML) provides a promising route for predicting the low‐temperature impact toughness of thermo‐mechanical controlled processing (TMCP) microalloyed steels, yet data noise and microstructure‐dependent mechanisms remain major challenges.
Hengkun Li, Donghao Jin, Huibin Wu
openaire +1 more source
Machine learning (ML) provides a promising route for predicting the low‐temperature impact toughness of thermo‐mechanical controlled processing (TMCP) microalloyed steels, yet data noise and microstructure‐dependent mechanisms remain major challenges.
Hengkun Li, Donghao Jin, Huibin Wu
openaire +1 more source
Journal of Materials Engineering and Performance, 2018
In order to reveal how microscopic factors affect the toughness and the occurrence of cleavage fracture of a low-carbon MnCrMoNiCu alloyed steel, a series of thermal treatments was performed on the steel employing a thermomechanical simulator. These involved reheating samples at different temperatures (950-1250 °C), producing different prior austenite ...
Mi Luo +4 more
openaire +1 more source
In order to reveal how microscopic factors affect the toughness and the occurrence of cleavage fracture of a low-carbon MnCrMoNiCu alloyed steel, a series of thermal treatments was performed on the steel employing a thermomechanical simulator. These involved reheating samples at different temperatures (950-1250 °C), producing different prior austenite ...
Mi Luo +4 more
openaire +1 more source
Acta Metallurgica Sinica, 2012
The effect of austenitizing temperature on the microstructures and −20 impact toughness of HSLA100 steel was investigated by Gleeble-3500 thermal simulator. Its microstructures were observed by SEM and EBSD, and the relevant transformation kinetics was also analyzed by means of dilatometer.
Yang YOU, Xuemin WANG, Chengjia SHANG
openaire +1 more source
The effect of austenitizing temperature on the microstructures and −20 impact toughness of HSLA100 steel was investigated by Gleeble-3500 thermal simulator. Its microstructures were observed by SEM and EBSD, and the relevant transformation kinetics was also analyzed by means of dilatometer.
Yang YOU, Xuemin WANG, Chengjia SHANG
openaire +1 more source
Impact Toughness of Trace Element Doping Q460 at Low Temperature
SSRN Electronic Journal, 2022openaire +1 more source
The effect of ferrite number on impact toughness of austenitic stainless steels at low temperatures
2020De Albuquerque Vicente, André +4 more
openaire +1 more source