Results 241 to 250 of about 9,758,596 (278)
Some of the next articles are maybe not open access.

Material Removal Mechanism Of Laser Cutting

SPIE Proceedings, 1984
During laser cutting of relatively thick workpieces the erosion takes place at a nearly vertical plane at the momentary end of the cut. That plane is covered by a thin molten layer, that is heated by absorbed laser radiation and by reaction. The removal of material from that layer is carried out by evaporation and by ejection of molten material due to ...
D Schuocker, W Abel
openaire   +1 more source

On the mechanism of material removal at the nanoscale by cutting

Wear, 2010
Material removal by machining at the nanoscale is simulated with an atomic force microscope (AFM) by in situ scratching of a ductile workmaterial (aluminum) by a hard tool (the diamond stylus of an AFM). In view of nanometric depths of cut and large radius of the tool used in the finishing operations, the material is pushed mostly to the sides by ...
R. Komanduri   +2 more
openaire   +1 more source

On the mechanics of material removal in ultrasonic machining

International Journal of Machine Tool Design and Research, 1979
Abstract An analysis of material removal in ultrasonic machining considering direct impact of abrasive grains on the workpiece is presented. Non-uniformity of abrasive grains is considered by using a probability distribution for the diameter of the abrasive particles as suggested by Rozenberg.
G.S. Kainth, Amitav Nandy, Kuldeep Singh
openaire   +1 more source

Material Removal Mechanisms in Cu Electrochemical Mechanical Polishing

Applied Mechanics and Materials, 2014
The material removal mechanisms for Cu electrochemical mechanical planarization (ECMP) including 5-Methyl-1H-Benzotriazole (TTA), hydroxyethylidenedi phosphoric acid (HEDP), and tribasic ammonium citrate (TAC) were investigated by electrochemical techniques, X-ray photoelectron spectrometer (XPS) analysis, and polishing of Cu-coated blanket wafers. The
Yan Fei Bian, Wei Jie Zhai
openaire   +1 more source

Material removal mechanisms in electrochemical–mechanical polishing of tantalum

Electrochimica Acta, 2009
Abstract Material removal mechanisms in tantalum chemical–mechanical polishing (CMP) and electrochemical–mechanical polishing (ECMP) were investigated using the single frequency electrochemical impedance spectroscopy (EIS). Through measuring the impedance of the tantalum surface, the single frequency EIS scan made it possible to observe the CMP and ...
F. Gao, H. Liang
openaire   +1 more source

Understanding the Material Removal Mechanisms

2013
This chapter explains various material removal pathways in relation to diamond polishing. The discussion here highlights the fact that the mechanisms for the removal of carbon atoms from a diamond substrate, which include the conversion of diamond to non-diamond carbon, chemical/mechanical removal, micro-cleavage, diffusion of carbon into soluble ...
Yiqing Chen, Liangchi Zhang
openaire   +1 more source

Toward a Mechanical Mechanism for Material Removal in Magnetorheological Finishing

Optical Fabrication and Testing, 1996
Interest in magnetic finishing has increased greatly during the past decade [1-3]. Among the various approaches, the most recently developed process is called magnetorheological finishing (MRF) [2,3]. In MRF, a magnetorheological suspension is used to polish optical glasses and other materials.
J. Lambropoulos   +2 more
openaire   +1 more source

The Mechanism of Material Removal in the Erosive Cutting of Brittle Materials

Journal of Engineering for Industry, 1966
An analysis is presented for the erosive cutting of a brittle material by the normal impact of a stream of solid particles. The volume of material removed by a given number of particles is predicted to be: W=krf1(m)Uf2(m) In this expression, k is a quantity involving material constants, r is the average radius, and U the velocity of the impacting ...
G. L. Sheldon, I. Finnie
openaire   +1 more source

Material removal mechanisms in grinding of two-phase brittle materials

The International Journal of Advanced Manufacturing Technology, 2017
The material removal mechanisms of one-phase brittle materials during grinding are largely understood. In contrast, the material removal mechanisms of two-phase brittle materials are just known rudimentary hindering the prediction of the workpiece surface characteristics resulting from a grinding process.
Sebastian Mueller   +4 more
openaire   +1 more source

An Analyzing on Material Removal Mechanism in Chemical Mechanical Polishing of Cu

Key Engineering Materials, 2009
The components of material removal in wafer Chemical mechanical polishing (CMP) was described qualitatively based on theory of corrosive wear. The value of each component was obtained by a series of wafer CMP experiments. According to analyzing the experiment results, some conclusions are obtained as follows.
Jian Xiu Su   +4 more
openaire   +1 more source

Home - About - Disclaimer - Privacy