Results 31 to 40 of about 80,178 (291)
Fabricating Homogeneous FeCoCrNi High-Entropy Alloys via SLM In Situ Alloying
Metals, 2021 Selective laser melting (SLM) in situ alloying is an effective way to design and fabricate novel materials in which the elemental powder is adopted as the raw material and micro-areas of elemental powder blend are alloyed synchronously in the forming ...
Yaqing Hou +4 more
doaj +1 more source
Advances in Materials Science and Engineering, 2013 Multiwall carbon nanotubes (MWCNTs) reinforced Mg alloy AZ31 nanocomposites were fabricated by mechanical alloying and powder metallurgy technique. The reinforcement material MWCNTs were blended in three weight fractions (0.33%, 0.66%, and 1%) with the ...
J. Jayakumar, B. K. Raghunath, T. H. Rao
doaj +1 more source
工程科学学报, 2022 Lightweight high-temperature titanium alloys are a key material for aero-engines. With the increasing use of new titanium alloys in aero-engines, titanium fire has become a typical catastrophic fault that plagues material design and selection.
Ya-di LI +4 more
doaj +1 more source
Cogent Engineering, 2021 This research focusses on the dual phase (ferrite and bainite) treatment for medium carbon steels containing same carbon content (different alloying elements) and mechanical properties, as well as microhardness and microstructure. Dual phase treatment is
Gurumurthy B M +4 more
doaj +1 more source
Journal of Materials Research and Technology, 2021 The present study investigated the effect of mechanical alloying (MA) time, preheating and annealing process on phase and microstructural transformations in Al65Cu23Fe12 (at%) alloys.
Vahid Aghaali +4 more
doaj +1 more source
Advanced Engineering Materials, Volume 27, Issue 6, March 2025.The stability criteria affecting the formation of high‐entropy alloys, particularly focusing in supersaturated solid solutions produced by mechanical alloying, are analyzed. Criteria based on Hume–Rothery rules are distinguished from those derived from thermodynamic relations. The formers are generally applicable to mechanically alloyed samples.
Javier S. Blázquez +5 more
wiley +1 more source
Modeling and Analysis of Mechanical Properties in Structural Steel-DOE Approach
Archives of Foundry Engineering, 2015 The present work focuses on the modeling and analysis of mechanical properties of structural steel. The effect of major alloying elements namely carbon, manganese and silicon has been investigated on mechanical properties of structural steel.
Bhatt A., Parappagoudar M.B.
doaj +1 more source
Cailiao gongcheng, 2021 Micro-addition of alloying elements is not only an effective method to improve the overall performance of aluminum matrix composites but also a proven workable low-cost technology in improving the reinforced phase/matrix interface structure and ...
XUE Yan-qing +4 more
doaj +1 more source
Thermoreflectance Detection of Point Defects Resulting from Focused Ion Beam Milling
Advanced Engineering Materials, EarlyView.Focused ion beam (FIB) milling is a common tool for nanoscale material processing, however irradiation damage, redeposition, and contamination can occur. We use several characterization tools to show FIB‐induced effects beyond 1 mm from the milled area.
Thomas W. Pfeifer +3 more
wiley +1 more source
Nanostructured Alloys and Mechanical Alloying [PDF]
, 2003 NANOSTRUCTURED ALLOYS AND MECHANICAL ALLOYING. This paper reviews the formation of nanostructured alloys, recent development of nanocrystalline magnesium alloys and their nanocomposite synthesized via mechanical alloying.
Lai, M. O. (M), Lu, L. (L)
core