Results 11 to 20 of about 5,009 (259)
Tempering and Austempering of Double Soaked Medium Manganese Steels [PDF]
The addition of a tempering or austempering step to the double soaking of a 0.14C–7.17Mn (wt pct) steel was investigated in the present contribution. The double soaking heat treatment is a two-step intercritical annealing heat treatment, which generates microstructures of athermal martensite, retained austenite and ferrite when applied to medium ...
Alexandra Glover +3 more
openaire +2 more sources
Microstructure and properties of (Ti, Cr) C reinforced novel medium manganese steel
In the casting process, alloying elements Mo and Cr are needed to improve the wear resistance of medium manganese steels for low impact energy. The element Ti is added to avoid the high cost of expenditure for using Mo.
Zhengbing Meng +3 more
doaj +1 more source
The effect of manganese content, aluminium content, top slag and stirring on manganese-containing inclusions characteristics was investigated by laboratory thermal experiments and precipitation thermodynamics calculation.
Jianhua Chu +6 more
doaj +1 more source
Forecasting the steelmaking and casting of a medium manganese steel
Abstract The steelmaking and casting of medium Mn steels brings some challenges in the production route because of their high alloying content. In this paper, the evaluation of the casting processes for these steel chemistries is assessed with a set of models and laboratory-scale tests, in order to find possible casting conditions ...
B. Santillana, R. Rana, A. Burghardt
openaire +1 more source
The continuous casting behavior of medium manganese steels
Journal of materials research and technology : jm&t 15, 292-305 (2021).
Tarek Allam +5 more
openaire +3 more sources
Effect of Lost-Foam Casting Process on Properties of Spiral Blade
The wear failure mode of a paver spiral blade was simulated by EDEM software. High-manganese steel, medium chromium alloy steel, and high chromium alloy steel were selected as matrix materials; SiC particles and WC particles were selected as surface ...
Yi Li, Pengxiao Zhu, Cai Tang, Zhi Sun
doaj +1 more source
Plasma Nitriding of an Air-Hardening Medium Manganese Forging Steel
Abstract The impact of plasma nitriding on the microstructure and the hardness of a recently developed 4 wt.-% medium manganese steel are presented. In contrast to standard quench and tempering steels, the investigated material achieves its martensitic microstructure by air-cooling from the forging heat, which enables the reduction of
Gramlich, Alexander Roald Michael +2 more
openaire +3 more sources
In this study, the hot rolled medium manganese steel containing titanium was solution treated at 1,000 °C and followed by aging treatment at 500, 550, and 600 °C.
Zhihui Cai +5 more
doaj +1 more source
Alloying and Processing of Medium Manganese Steels for Forging Applications
AbstractThe processability of medium Mn-containing steels (MMnS) with 4–10% Mn is discussed in light of their continuous casting behavior. Precipitation, phase transformation, extension, or shift of solidification intervals induced by various alloying concepts are decisive in controlling the hot ductility. It turns out that the formation of complex AlN
Bleck, Wolfgang +2 more
openaire +2 more sources
Microstructure Evolution of a Medium Manganese Steel During Thermomechanical Processing [PDF]
An as-cast Fe-0.2C-10Mn-3Si-3Al medium manganese steel with a ferrite plus austenite duplex microstructure was subjected to hot compression tests at deformation temperatures within two-phase (α + γ) range and various strain rates. The microstructure evolution of the experimental steel during hot deformation was investigated.
Sun, Binhan +3 more
openaire +2 more sources

