Results 21 to 30 of about 5,018 (255)
Effect of Lost-Foam Casting Process on Properties of Spiral Blade
Crystals, 2022 The wear failure mode of a paver spiral blade was simulated by EDEM software. High-manganese steel, medium chromium alloy steel, and high chromium alloy steel were selected as matrix materials; SiC particles and WC particles were selected as surface ...
Yi Li, Pengxiao Zhu, Cai Tang, Zhi Sun
doaj +1 more source
Plasma Nitriding of an Air-Hardening Medium Manganese Forging Steel
HTM Journal of Heat Treatment and Materials, 2022 Abstract The impact of plasma nitriding on the microstructure and the hardness of a recently developed 4 wt.-% medium manganese steel are presented. In contrast to standard quench and tempering steels, the investigated material achieves its martensitic microstructure by air-cooling from the forging heat, which enables the reduction of
Gramlich, Alexander Roald Michael +2 more
openaire +3 more sources
Friction, 2023 In this study, the hot rolled medium manganese steel containing titanium was solution treated at 1,000 °C and followed by aging treatment at 500, 550, and 600 °C.
Zhihui Cai +5 more
doaj +1 more source
Microstructure Evolution of a Medium Manganese Steel During Thermomechanical Processing [PDF]
Metallurgical and Materials Transactions A, 2016 An as-cast Fe-0.2C-10Mn-3Si-3Al medium manganese steel with a ferrite plus austenite duplex microstructure was subjected to hot compression tests at deformation temperatures within two-phase (α + γ) range and various strain rates. The microstructure evolution of the experimental steel during hot deformation was investigated.
Sun, Binhan +3 more
openaire +2 more sources
Alloying and Processing of Medium Manganese Steels for Forging Applications
BHM Berg- und Hüttenmännische Monatshefte, 2022 AbstractThe processability of medium Mn-containing steels (MMnS) with 4–10% Mn is discussed in light of their continuous casting behavior. Precipitation, phase transformation, extension, or shift of solidification intervals induced by various alloying concepts are decisive in controlling the hot ductility. It turns out that the formation of complex AlN
Bleck, Wolfgang +2 more
openaire +2 more sources
Special issue on ‘Medium manganese steels’ [PDF]
Materials Science and Technology, 2019 The global automotive industry has been desperately striving to address the challenge of weight reduction in automobiles in order to decrease the carbon footprint and increase fuel efficiency.
openaire +1 more source
Metals, 2020 An Fe-0.15C-1.2Si-5Mn-0.09Nb-0.08V-0.07Mo (wt.%) medium manganese steel that was subjected to a novel austenite reverted transformation (ART) annealing process.
Caiyi Liu +3 more
doaj +1 more source
Materials & Design, 2023 A V-alloyed medium manganese steel with the yield strength of 1107 MPa, tensile strength of 1231 MPa and total elongation of 44.5 % was obtained directly by warm rolling.
Yingchao Zhang +5 more
doaj +1 more source
Metals, 2018 This study investigated the microstructure–tensile properties relationship and the retained austenite room temperature stability of a Nb and Mo micro-alloyed medium manganese transformation induced plasticity (TRIP) steel. A number of findings were
Chunquan Liu +5 more
doaj +1 more source
Journal of Materials Research and Technology, 2023 In this study, a novel multi-step heat treatment method, including intercritical annealing and tempering, is proposed to improve the low-temperature toughness of Fe-6.5Mn-0.08C medium-manganese (Mn) steel.
Seung-Hyeok Shin +3 more
doaj +1 more source