Results 41 to 50 of about 297 (207)

Microstructure Evolution of a VMnFeCoNi High‐Entropy Alloy After Synthesis, Swaging, and Annealing

Advanced Engineering Materials, EarlyView.
The synthesis and processing (rotary swaging and annealing) of the novel VMnFeCoNi alloy is investigated, alongside the estimation of the grain size effect on hardness. Analysis of a wide grain size range of recrystallized microstructures (12–210 µm) reveals a low annealing twin density.
Aditya Srinivasan Tirunilai, Zeki Ayrildi, Buse Şen, Maik Rajkowski, Mathias Redondo Garcia, Markus Stricker, Guillaume Laplanche   +6 more
wiley   +1 more source

High‐Temperature Nanoindentation of Metals: Assessing Thermal Drift, Frame Compliance, and Chemical Composition Effects on the Reported Mechanical Properties

Advanced Engineering Materials, EarlyView.
Do not let thermal drift and instrument artifacts deceive high‐temperature nanoindentation results. We compare classical Oliver–Pharr and automatic image recognition analyses across steels and a Ni alloy to quantify these effects. Accounting for artifacts reveals systematic softening with temperature, while Cr and Ni additions boost resistance ...
Velislava Yonkova, Steffen Brinckmann, Ruth Schwaiger   +2 more
wiley   +1 more source

External and Internal Cracking Caused by Heat Treatment in Laser Powder Bed Fusion‐Fabricated Inconel 738LC Components

Advanced Engineering Materials, EarlyView.
Manufacturing problems such as heat treatment‐induced cracking hinder the widespread application of the laser powder bed fusion (LPBF) process to superalloys. In this study, cracks in the LPBF components of Inconel 738LC superalloy are characterized after heat treatment at various temperature ranges, revealing two distinct cracking behaviors.
Kosuke Kuwabara, Masahiro Kusano, Ayako Ikeda, Toshio Osada, Makoto Watanabe   +4 more
wiley   +1 more source

Effect of manganese addition on resistance to pitting corrosion of duplex stainless steel S32205

工程科学学报, 2019
Duplex stainless steel (DSS) has been applied to marine industries, chemical plants, and nuclear facilities because of its high mechanical strength, good weldability, good resistance to pitting corrosion in various aggressive environments, and relatively
ZHENG Jian-chao, PAN Chao, ZHANG Jian-tao, FU Shao-peng, LIN Ping, HU Xiao-jun   +5 more
doaj   +1 more source

Enhancing Fatigue Crack Growth Resistance in Heterostructured Aluminum Bimetals by Tailored Interface Design

Advanced Engineering Materials, EarlyView.
Different Al/Al bimetals with a single engineered interface reveal how mechanical mismatch governs fatigue crack growth under cyclic loading. Additionally, loading–unloading–reloading tests link the microyielding behavior to the fatigue crack growth resistance, while crack‐path analysis reveals toughening mechanisms at the interface, highlighting ...
Sebastian Vollath, Philip Manuel Pohl, Heinz Werner Höppel   +2 more
wiley   +1 more source

Superplasticity in a lean Fe-Mn-Al steel

Nature Communications, 2017
Research in new alloy compositions and treatments may allow the increased strength of mass-produced, intricately shaped parts. Here authors introduce a superplastic medium manganese steel which has an inexpensive lean chemical composition and which is ...
Jeongho Han, Seok-Hyeon Kang, Seung-Joon Lee, Megumi Kawasaki, Han-Joo Lee, Dirk Ponge, Dierk Raabe, Young-Kook Lee   +7 more
doaj   +1 more source

Distinct Microstructural Characteristic Lengths Defining Notch Fatigue Crack Initiation and Propagation, and Defect Tolerance in Advanced Steels

Advanced Engineering Materials, EarlyView.
Schematic representation of modes of microcrack nucleation, growth and temporary arrestment at different boundaries, with the criteria for crack propagation in three scenarios: (1) large notch, (2) defect/small sharp notch, and (3) long crack. This work revisits and integrates results on the fatigue behavior of advanced bainitic steels (in particular ...
Lucia Morales‐Rivas
wiley   +1 more source

Comparison of Medium Manganese Steel and Q345 Steel on Corrosion Behavior in a 3.5 wt % NaCl Solution [PDF]

Materials, 2017
A cyclic wet/dry accelerated corrosion test was used to compare the corrosion behavior of medium-Mn steel and Q345 steel. In terms of scanning electron microscope (SEM), using X-ray diffraction (XRD), electron probe microanalysis (EPMA), X-ray photoelectron spectroscopy (XPS), and analysis of the corrosion process, the results showed that the medium-Mn
Su, Guanqiao, Gao, Xiuhua
openaire   +2 more sources

Microstructure–Property Relationships in Thermomechanically Processed Medium-Mn Steels with High Al Content

Metals, 2018
Detailed studies on microstructure⁻property relationships of thermomechanically processed medium-Mn steels with various manganese contents were carried out. Microscopic techniques of different resolution (LM, SEM, TEM) and X-Ray diffraction methods
Adam Grajcar, Andrzej Kilarski, Aleksandra Kozlowska   +2 more
doaj   +1 more source

Insights into the high magnetic field-induced austenite formation in medium manganese steel

Journal of Materials Research and Technology, 2023
The mechanism of austenite formation in medium Mn steel tempered at 700 °C for 3 h without and with a 12 T magnetic field was investigated. The application of magnetic field results in lattice distortion of the martensite matrix, implying the presence of
Dong Zhang, Tingping Hou, Xueling Quan, Jie Zhou, Chaochao Yin, Hengfu Lin, Zhihong Lu, Kaiming Wu   +7 more
doaj   +1 more source