Results 91 to 100 of about 2,413,180 (297)
Experiments and thermophysical simulations were conducted to investigate the electron beam powder bed fusion electron beam (PBF‐EB/M) process for the γ′‐strengthened nickel‐based superalloy Inconel 738LC. The results demonstrate the impact of process‐induced microstructural variations on high‐temperature mechanical behavior, providing a basis for ...
Jan Niklas Petenati +11 more
wiley +1 more source
Why the melting layer radar reflectivity is not bright at 94 GHz
At 94 GHz, the highest radar frequency used for atmospheric research, no radar bright band is observed at the melting layer. In this study, simulations of a vertical profile of melting particles and their scattering properties for a variety of melting ...
Kollias, Pavlos +3 more
core +1 more source
The present investigation deals with the study of fluid flow and heat transfer characteristics occurring during the melting process due to a stretching surface in micropolar fluid with heat absorption. The governing equations representing fluid flow have
Khilap Singh, Manoj Kumar
doaj +1 more source
In situ synchrotron high‐energy X‐ray diffraction reveals the real‐time high‐temperature phase evolution of a ternary V‐9Si‐6.5B alloy. The study uncovers a kinetically delayed V5SiB2 → V8SiB4 transformation governed by massive structural and chemical barriers.
Zahra Sabeti +4 more
wiley +1 more source
Impact of MgO Additions on the Oxidation Resistance and Compression Behavior of Vanadium Alloys
An increase in oxidation resistance at 600 °C is achieved for alloys containing more than 2.5 wt.% MgO. It has been established that, along with V2O5, MgO6V2, and Mg2O7V2 are formed, which are presumed to enhance oxidative stability. Furthermore, the possible transformation of Mg‐vanadates through reaction with CO2, which presumably occurs in this ...
Ievgen Solodkyi +5 more
wiley +1 more source
Direct comparisons are made between the crystallographic texture and residual stress distribution within two otherwise identical Inconel cubes produced by Selective Laser Melting (SLM) and Electron Beam Melting (EBM) additive manufacturing processes.
C.M. Wensrich +4 more
doaj +1 more source
Method for detecting the extent of the melting layer
Comparisons of current melting band detection techniques applied to hundreds of CAMRa RHI scans have revealed differences in estimating the width of the melting band as high as 600 m. The authors present a more accurate method for the determination of the width of the melting band and the implications for attenuation modelling of earth-space ...
J. Bandera +4 more
openaire +1 more source
Postbuild annealing systematically modifies the phase fractions and morphology of EB‐PBF processed Mo–9Si–8B. Quantitative microstructure–property correlations reveal how controlled phase evolution enhances high‐temperature compressive strength and creep resistance.
Christopher Schmidt +5 more
wiley +1 more source
This article investigates the dependence of the properties on the manufacturing orientation in the form of the inclination angle to the build plate of LPBF‐fabricated NiTi rods with a diameter of 150–220 µm. Metallographic, chemical, thermal, and mechanical characterization show behavior under identical manufacturing conditions that ranges from ...
Sandra Herzig +2 more
wiley +1 more source
Month-to-month variability of the melting layer boundaries [PDF]
The Bright-band is the typical enhancement in radar reflectivity during the melting process, which is still not completely determined. The seasonal variation over the year can give the characteristics that are valuable for designing and planning of a ...
Sharif, Omer Abdel Razag +3 more
core

