Results 101 to 110 of about 63,518 (304)
Analysis and optimization of meshing characteristics of power-split hub reducers
Jixie chuandongObjectiveAiming at the meshing characteristics of the hub reducer, the transmission system analysis software KISSsoft is used to analyze it, and the meshing quality is improved through optimization methods.MethodsFirstly, a meshing analysis model of the ...
WANG Zhao +5 more
doaj
Aerated blast furnace slag filters for enhanced nitrogen and phosphorus removal from small wastewater treatment plants [PDF]
, 2010 Rock filters (RF) are a promising alternative technology for natural wastewater treatment for upgrading WSP effluent. However, the application of RF in the removal of eutrophic nutrients, nitrogen and phosphorus, is very limited.
Hamdan, Rafidah
core
Advanced Engineering Materials, EarlyView.Four‐point bending tests are conducted in an argon atmosphere on commercial MgO‐C brick grades with and without MgO‐C recyclate from room temperature up to 1300 °C. No detrimental effect of the MgO‐C recyclates on bending strength is found. Instead, a decisive influence of the total carbon content is observed, with lower total carbon contents ...
Alexander Schramm +5 more
wiley +1 more source
Jixie chuandong, 2011 Due to the characteristics of modification coefficient change along the axial in variable tooth thickness gears,the contact angle,cone angle,contact ratio,pressure angle of addendum circle in different normal section,sliding rate and other parameters are
蒋汉军, 王光建, 褚志刚
doaj
Dynamic Analysis of Helical Gears With Sliding Friction and Gear Errors
IEEE Access, 2018 In helical gears, the meshing stiffness fluctuation caused by the time-varying contact lines and gear errors is a main factor affecting the dynamic characteristics of the helical gears.
Wenchao Mo, Yinghou Jiao, Zhaobo Chen
doaj +1 more source
Design and development of auxiliary components for a new two-stroke, stratified-charge, lean-burn gasoline engine [PDF]
, 2005 A unique stepped-piston engine was developed by a group of research engineers at Universiti Teknologi Malaysia (UTM), from 2003 to 2005. The development work undertaken by them engulfs design, prototyping and evaluation over a predetermined period of ...
Abdul Aziz, Azhar +5 more
core
, 2019 This paper presents a novel spline-based meshing technique that allows for usage of boundary-conforming meshes for unsteady flow and temperature simulations in co-rotating twin-screw extruders.
Elgeti, Stefanie +3 more
core +1 more source
Mesh reinforced membrane and its wrinkling characteristics
, 2013 Membrane structures have received a wide range of attention in applications of large-scale spacecrafts, such as inflated wing, light-than-air (LTA) airship and membrane antenna reflector, and so on. These spacecrafts need to be designed as high loading-efficiency components or structures, especially with high shape precision [1].
Wang, C., Zhang, L., Tan, H., Wan, Z.
openaire +1 more source
Advanced Engineering Materials, EarlyView.This study investigates thermo‐chemical processes during high‐temperature testing of two commercial MgO‐C brick grades, one containing 47.5 wt.% MgO‐C recyclate. Using ETV, DTA/TG‐MS, XRD, and SEM/EDS/EBSD, mechanisms such as carbothermal reduction of magnesia, impurity incorporation into the secondary MgO surface layer, and calcium‐rich phase ...
Alexander Schramm +6 more
wiley +1 more source
Study on the Influence of Modified Design on the Dynamic Characteristics of the Helical Gear System
Jixie chuandongIn order to study the dynamic characteristics of helical gears with different modified designs, a pair of standard gears and modified gears are taken as comparative experimental objects, and the dynamics model of a modified helical gear system is ...
Wang Ruoyi, Yang Jianwei, Wang Jinhai
doaj