Results 91 to 100 of about 982,999 (295)
RESIDUAL STRESSES IN AS-CAST BILLETS: NEUTRON DIFFRACTION MEASUREMENT AND THERMOMECHANICAL MODELING [PDF]
, 2012 Stress relief treatment is often required prior to sawing aluminum DC cast products in order to prevent crack formation and significant safety concerns due to the presence of high residual stresses generated during casting.
C. Jaquerod +5 more
core +2 more sources
Conversion Coatings Produced on AZ61 Magnesium Alloy by Low-Voltage Process
Archives of Metallurgy and Materials, 2016 The resultes of anodic oxide conversion coatings on wrought AZ61 magnesium alloy production are describe. The studies were conducted in a solution containing: KOH (80 g/l) and KF (300 g/l) using anodic current densities of 3, 5 and 10 A/dm2 and different
Nowak M. +5 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.Low‐cycle fatigue damage in Mn–Mo–Ni reactor pressure vessel steel is examined using a combined electron backscatter diffraction and positron annihilation lifetime spectroscopy approach. The study correlates texture evolution, dislocation substructure development, and vacancy‐type defect formation across uniform, necked, and fracture regions, providing
Apu Sarkar +2 more
wiley +1 more source
Development in the drawing of metals Proceedings of the international conference
, 1983 SIGLEAvailable from British Library Document Supply Centre- DSC:5699.468(301) / BLDSC - British Library Document Supply CentreGBUnited ...
Metals Society, London (United Kingdom) +1 more
core
Archives of Metallurgy and Materials, 2015 Studies of composite nickel coatings electrolytically deposited on aluminium alloys with different content of vanadium were described. Composite coatings were deposited from a Watts bath containing fine-dispersed SiC powder particles in an amount of 20 g/
Nowak M. +5 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.A numerical–experimental framework is developed for characterizing multi‐matrix fiber‐reinforced polymers (MM‐FRPs) combining epoxy and polyurethane matrices. Harmonic bending tests are integrated with finite element model updating (FEMU) to simultaneously identify elastic and viscoelastic material parameters.
Rodrigo M. Dartora +4 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.Geometry‐driven thermal behavior in wire‐arc additive manufacturing (WAAM) influences microstructural evolution during nonequilibrium solidification of a chemically complex Fe–Cr–Nb–W–Mo–C nanocomposite system. By comparing different deposits configurations, distinct entropy–cooling rate correlations, segregation, and carbide evolution are revealed ...
Blanca Palacios +5 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.Thermomechanical fatigue tests of laser beam powder bed fusion (PBF‐LB) Inconel 718 show that the additively manufactured material reaches almost the lifetimes of conventionally‐rolled material under no‐dwell conditions. Introducing dwell times at the maximum temperature markedly reduces the lifetimes due to pronounced grain boundary sliding associated
Stefan Guth +6 more
wiley +1 more source
Temperature Dependence of Phonons in Elemental Cubic Metals Studied by Inelastic Scattering of Neutrons and X-Rays [PDF]
, 2009 The vibrations of atoms in a crystal (phonons) make up the majority of its entropy (or heat capacity), and these vibrations are typically modeled by simple harmonic oscillators.
Kresch, Max G.
core +1 more source
Advanced Engineering Materials, EarlyView.This article presents the design, modeling, and characterization of air‐pressure–actuated programmable vibroacoustic metamaterials (PVAMM). The study focuses on leveraging air pressure to dynamically tune resonance frequencies for effective noise attenuation.
William Kaal +2 more
wiley +1 more source