Results 31 to 40 of about 11,024 (183)
Engineering Reports, 2022 In the present work, the corrosion behavior of a twin‐roll cast WZ73 magnesium alloy is investigated by potentiodynamic polarization and climate chamber tests in different sodium chloride solutions.
Robert Hornig +3 more
doaj +1 more source
Mechanical and electrochemical deterioration mechanisms in the tribocorrosion of Al alloys in NaCl and in NaNO3 solutions [PDF]
, 2012 Tribocorrosion of Al-Si-Cu-Mg alloys was investigated in 0.05 M NaCl and 0.1 M NaNO3 solutions under severe sliding and controlled electrochemical conditions.
Mischler, S. +3 more
core +1 more source
Hydrogen evolution, efficiency and exacerbated galvanic corrosion damage of magnesium alloy anode
Cailiao gongcheng, 2021 To address the galvanic corrosion issue that is critically limiting the practical application of Mg alloys, the negative difference effect (NDE), anodic dissolution efficiency, and anodic hydrogen evolution were investigated by means of the hydrogen ...
HUANG Ju-feng, SONG Guang-ling
doaj +1 more source
Materials & Design, 2022 In this paper, Zn-3Ag and Zn-3Ag-0.5Mg alloys were studied in terms of applicability as biodegradable implant materials. The performed tensile, compression and bending tests indicate a high strengthening effect induced by the Ag and Mg additions ...
Maria Wątroba +7 more
doaj +1 more source
Electrochemical processes and systems: application for tutors [PDF]
, 1997 The features of redox reactions and the principles of their balancing according to the medium composition are considered. The basic representations about electrochemical processes and systems are outlined. The reactions and principles of chemical sources
Beccard, R. +5 more
core +1 more source
Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design
npj Materials Degradation, 2022 Widespread application of magnesium (Mg) has been prevented by its low strength and poor corrosion resistance. Core of this limitation is Mg’s low electrochemical potential and low solubility for most elements, favoring secondary phase precipitation ...
Oliver Renk +11 more
doaj +1 more source
Journal of Materials Research and Technology, 2023 The effect of Ce micro-alloying (0, 0.05, 0.1 and 0.2 wt.%) on the microstructure and corrosion resistance of as-cast Mg-4.5Al-1.5Sn-0.5Ca (ATX521) alloys was investigated.
Zhong-Zheng Jin +4 more
doaj +1 more source
Metals, 2021 Titanium and Zircaloy-4 dissimilar alloys were brazed with a zirconium-titanium-copper-nickel amorphous filler alloy, and the resulting joint structures as well as their corrosion properties were examined.
Si-Young Lee +4 more
doaj +1 more source
Boron Nitride Nanosheets for Metal Protection
, 2014 Although the high impermeability of graphene makes it an excellent barrier to inhibit metal oxidation and corrosion, graphene can form a galvanic cell with the underlying metal that promotes corrosion of the metal in the long term.
Chen, Ying +3 more
core +1 more source
Characterisation and understanding of the corrosion behaviour of the nugget in a 2050 aluminium alloy Friction Stir Welding joint [PDF]
, 2013 The corrosion behaviour of the nugget of a Friction Stir Welding joint employing a 2050 Al–Cu–Li alloy was investigated. The results showed that the nugget was susceptible to both intergranular and intragranular corrosion.
Alexis, Joël +5 more
core +3 more sources