Results 61 to 70 of about 11,024 (183)

Unveiling the effect of Al–Mn intermetallic on the micro-galvanic corrosion of AM50 Mg alloy in NaCl solution

open access: yesJournal of Materials Research and Technology, 2023
The influence of Al–Mn intermetallic on corrosion resistance of AM50 alloy was investigated. TEM-SAED was utilized to identify microstructure and composition of the corrosion products on Al–Mn intermetallic. The electrochemistry results revealed that the
Yan Li, Tao Zhang, Fuhui Wang
doaj   +1 more source

Effect of pulsed magnetic treatment on the corrosion of titanium [PDF]

open access: yes, 2017
This is an Accepted Manuscript of an article published by Taylor & Francis in Materials Science and Technology on 17 March 2017, available online: http://www.tandfonline.com/doi/full/10.1080/02670836.2017.1302141.Results of corrosion tests of titanium in
Babutskyi, Anatolii   +4 more
core   +2 more sources

Study of crevice-galvanic corrosion of aluminum [PDF]

open access: yes, 1967
Corrosion effects of aluminum-copper and aluminum-nickel couples in oxygenated distilled water, and aluminum alloys in oxygenated copper sulfate solution were studied. One of each of the couples had a water tight seal, and showed no substantial corrosion,
Draley, J. E., Loess, R. E., Mori, S.
core   +1 more source

Performance of a Magnesium-Rich Primer on Pretreated AA2024-T351 in Full Immersion: a Galvanic Throwing Power Investigation Using a Scanning Vibrating Electrode Technique [PDF]

open access: yes, 2018
The scanning vibrating electrode technique (SVET) was employed to examine the effect of ‘galvanic throwing power’ and the distance over which a Mg-rich primer (MgRP) provided sacrificial anode-based cathodic protection to AA2024-T351.
Geraint Williams, Hamilton McMurray
core   +1 more source

The influence of cobalt on the microstructure and adherence characteristics of enamel on steel sheet [PDF]

open access: yes, 2011
In this study, the influence of cobalt (Co) on the microstructure and adhesion between enamel and steel substrate has been investigated. The result of press test indicated that the adhesion strength was greatly improved by Co inclusion.
Amin Davarpanah, Masoud Bodaghi
core  

The use of nano/micro-layers, self-healing and slow release coatings to prevent corrosion and biofouling [PDF]

open access: yes, 2014
The mitigation of corrosion and biofouling is a challenge. Through application of chemicals and special techniques can slow these undesired processes, an effective resolution requires a multidisciplinary approach involving scientists, engineers, and ...
Ai   +172 more
core   +1 more source

Avalanches during micro-galvanic corrosion of Mg-Cu-Al alloys in NaCl solution

open access: yesPhysical Review Materials
Alloying metals improves their mechanical properties. In the case of Mg, alloying atoms, such as Cu and Al, act as microcathodes and accelerate corrosion. We establish the relationship between the corrosion mechanisms and avalanche dynamics as observed by acoustic emission (AE) spectroscopy.
Wei Tan   +4 more
openaire   +1 more source

To develop a new mineral carbonation process that have a high efficiency in CO2 absorption into industry slag using low energy mechanical milling [PDF]

open access: yes, 2021
Increase in the CO2 emission in atmosphere due to the combustion of fossil fuels has caused serious global warming. Electricity generation, tranportation, and industrial waste are the main sectors indentified to contribute to the emission of CO2 in ...
Muhd Nor, Nik Hisyamudin
core  

Influence of plasma electrolytic oxidation coating on reducing the corrosion rate of dissimilar FSW joint between AA5052 and AZ31 alloys by minimizing effect of different galvanic couple types

open access: yesJournal of Materials Research and Technology
This study investigated the different aspects of macro/micro-galvanic corrosion behavior of plasma electrolytic oxidation coating (PEO) applied on a dissimilar joint. In this regard, AA5052 and AZ31 were joined by friction stir welding.
Saeed Safari   +2 more
doaj   +1 more source

Electrochemical analysis of austenitic stainless steel of type 304L SS in nitric acid medium [PDF]

open access: yes, 2013
Austenitic stainless steels type 304L and 316L are largely used as structural materials for equipments handling nitric acid media in nuclear reprocessing plants.
Phanindra, Srungavarapu Durga   +1 more
core  

Home - About - Disclaimer - Privacy