Results 1 to 10 of about 1,698 (215)

Study on the Mechanism of Burr Formation by Simulation and Experiment in Ultrasonic Vibration-Assisted Micromilling. [PDF]

Micromachines (Basel), 2023
Due to the strong plasticity of Inconel 718 and the significant size effect of micromachining, a large number of burrs will be produced in traditional processing. The addition of ultrasonic vibration during machining can reduce the burr problem.
Zhang Y, Yuan Z, Fang B, Gao L, Chen Z, Su G.   +5 more
europepmc   +5 more sources

Influence of Material Microstructures in Micromilling of Ti6Al4V Alloy [PDF]

Materials, 2013
In the most recent decades the introduction of unconventional machining processes allowed the development of micromachining techniques. In this work, the influence of material microstructures on the micromilling process was investigated. Ti6Al4V alloy was selected as workpiece material since it is a very common material for micro applications and ...
Aldo Attanasio, Marcello Gelfi, Annalisa Pola, Elisabetta Ceretti, Claudio Giardini   +4 more
openalex   +5 more sources

IMPACT TESTS OF MICROMILLING TOOL MOUNTED IN MICROMILLING MACHINE SPINDLE [PDF]

Management Systems in Production Engineering, 2012
Method of performing impact test of tool mounted in micromilling machine spindle is presented. Due to very small tool dimensions performing impact test in classical way is impossible. Accelerometer cannot be used for impulse response measurement. For measurement of tool displacement laser vibrometer is used.
Marcin MATUSZAK
openaire   +2 more sources

Design and Optimization of Micromilling Cutting Tools [PDF]

MATEC Web of Conferences, 2018
With the trend towards miniaturization, micromachining become more and more important in fabricating micro parts. The micromachining process that involved in this study is micro milling. The focus of the study is on the comparison performance between various numbers of flutes (4-flutes, 6-flutes and 8-flutes) with various helix angle (25º,30º and 35º ...
Siregar Ikhsan, Saedon Juri Bin, Adenan Mohd Shariman   +2 more
openaire   +2 more sources

Tolerances in microfluidic master molds: a comparison of 3D printing and micromilling. [PDF]

RSC Adv
Chavarria D, Ojetola I, Russotti ML, Yates AK, Lippmann ES.   +4 more
europepmc   +3 more sources

Micromilling vs hand drilling in stable isotope analyses of incremental carbonates: The potential for δ¹³ C contamination by embedding resin. [PDF]

Rapid Commun Mass Spectrom, 2022
Branscombe T, Lee-Thorp J, Schulting R, Leng M.   +3 more
europepmc   +3 more sources

Cutting Force-Vibration Interactions in Precise-and Micromilling Processes: A Critical Review on Prediction Methods. [PDF]

Materials (Basel)
Wojciechowski S, Suszyński M, Talar R, Černohlávek V, Štěrba J.   +4 more
europepmc   +2 more sources

Characterization of machine tools and measurement system for micromilling [PDF]

Nanotechnology and Precision Engineering, 2019
Technological progress has led to increased demand for small components with tiny features, which cannot be achieved through conventional machining.
Andrea Abeni, Matteo Lancini, Aldo Attanasio   +2 more
openalex   +3 more sources

Component library creation and pixel array generation with micromilled droplet microfluidics. [PDF]

Microsyst Nanoeng
McIntyre D, Arguijo D, Kawata K, Densmore D.   +3 more
europepmc   +3 more sources

Experimental Research on Deep-And-Narrow Micromilled Grooves Using a Self-Fabricated PCD Micro-Cutter. [PDF]

Micromachines (Basel), 2021
Deep-and-narrow micro-grooves are the common functional structures of miniature parts. The fabrication of the micromilled grooves with high quality and accuracy is the essential guarantee of the causative performance for these miniature parts, and ...
Han J, Ma R, Hao X, Kong L, Chen N, Li L, He N.   +6 more
europepmc   +2 more sources