Results 51 to 60 of about 26,276 (188)
Subgrain and Cavity Development during Creep of Al‐3.85%Mg
Advanced Engineering Materials, EarlyView.Al‐3.85%Mg does form subgrains if crept at very high strains. This fact allows the unification of the creep description in two different alloys such as pure Al and Al–Mg alloys. It is classically considered that the creep mechanisms for type M (e.g., pure Al) and type A alloys (e.g., Al–Mg alloys) are different.
Augusta Isaac +6 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.This study presents a 3D representative volume element‐based simulation approach to predict mesoscopic residual stress and strain fields in silicon solid solution‐strengthened ductile cast iron. By modeling phase transformation kinetics with an enhanced Johnson–Mehl–Avrami–Kolmogorov model, the effects of varying cooling rates on residual stresses are ...
Lutz Horbach +6 more
wiley +1 more source
Scanning transmission electron microscopy* [PDF]
Journal of Microscopy, 1974 SUMMARYThe scanning transmission electron microscope is of quite recent origin, and it is only in the last few years that it has been shown that this instrument is capable of giving the same high resolution as the conventional electron microscope. In this article we examine the conditions necessary for the achievement of high resolution and also the ...
openaire +3 more sources
High‐Temperature Oxidation of the CrFeNi Medium‐Entropy Alloy
Advanced Engineering Materials, EarlyView.The oxidation behavior of equiatomic CrFeNi MEA is a key issue that determines this material's suitability for high‐temperature application. The understanding of long‐term behavior is even more crucial than short‐term corrosion effects. The alloy is exposed to synthetic air at 1000, 1050, and 1100 °C for 24, 100, and 1000 h and systematically compared ...
Anna Maria Manzoni +5 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.This study designs Ta–Mo–Cr–Ti–Al refractory high‐entropy alloys with a disordered body‐centered‐cubic A2 crystal structure aiming for improved ductility, lower density, and oxidation resistance. Four alloy compositions are identified by thermodynamic calculations.
Kateryna Khanchych +7 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.High‐performance nickel‐based superalloys are often not processible in additive manufacturing (AM) due to hot cracking. The findings in this manuscript propose an efficient method to mitigate cracking and enhance mechanical properties of these alloys by producing a metal matrix composite, contributing to the material and process perspective of the AM ...
Klaus Büßenschütt +3 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.This work reveals the phase composition and quantitative morphology analysis of precipitation‐hardened Fe32Cu12Ni11Ti16Al29 complex‐concentrated alloy. The precipitates are shown to have a high coherency. Morphology transition between sphere, cuboidal, and elongated morphology is observed. Finally, the overaging behavior is captured using microhardness.
Rostyslav Nizinkovskyi +4 more
wiley +1 more source
Scanning transmission electron microscopy [PDF]
Le Journal de Physique IV, 1993 No abstract ...
openaire +3 more sources
Advanced Engineering Materials, EarlyView.The influence of Hot Isostatic Pressing (HIP) temperature on the microstructure and creep performance of powder bed fusion–laser beam processed CM247LC superalloy is investigated. Grain growth and γ’ precipitate evolution are characterized following HIP at varying temperatures.
Ahmed Fardan +4 more
wiley +1 more source