Results 161 to 170 of about 3,866,167 (193)
Metallography, Microstructure, and Analysis, 2020 The microstructural and hardness properties of welded joints of AA 6005-T6 aluminum alloy obtained with metal inert gas (MIG), fiber laser–MIG hybrid, and cold metal transfer (CMT) welding were analyzed immediately after welding and after 3 years of natural aging.
Cornacchia G. +3 more
openaire +2 more sources
Some of the next articles are maybe not open access.
Related searches:
Related searches:
Materials Today: Proceedings, 2018
Abstract Welding parameters play a great significant role in determining the weld joint quality in terms of weld-bead geometry. To obtain a good quality weld, it is necessary to select the proper welding parameters. This study focuses on the optimization parameters for Metal Inert Gas (MIG) welding on AISI 1018 mild steel by Teaching-Learning Based ...
Bhagwan F Jogi
exaly +2 more sources
Abstract Welding parameters play a great significant role in determining the weld joint quality in terms of weld-bead geometry. To obtain a good quality weld, it is necessary to select the proper welding parameters. This study focuses on the optimization parameters for Metal Inert Gas (MIG) welding on AISI 1018 mild steel by Teaching-Learning Based ...
Bhagwan F Jogi
exaly +2 more sources
International Journal of Fatigue, 2017
Environmentally assisted fatigue crack propagation behaviour of metal inert gas (MIG) welded AA5083 joints under stress relieving treatment has been investigated. In this study, ‘in-process’ stress relieving treatment, namely static thermal tensioning was applied during MIG welding process.
M N Ilman
exaly +2 more sources
Environmentally assisted fatigue crack propagation behaviour of metal inert gas (MIG) welded AA5083 joints under stress relieving treatment has been investigated. In this study, ‘in-process’ stress relieving treatment, namely static thermal tensioning was applied during MIG welding process.
M N Ilman
exaly +2 more sources
Effect of Pulsed Metal Inert Gas (Pulsed-MIG) and Cold Metal Transfer (CMT) Techniques on Hydrogen Dissolution in Wire Arc Additive Manufacturing (WAAM) of Aluminium [PDF]
International Journal of Advanced Manufacturing Technology, 2020 Aluminium is one of the most experimented metals in the WAAM field owing to a wide range of applications in the automotive sector. Due to concerns over reduction of strength, elimination of porosity from wire arc additive manufactured aluminium is one of
Adrian Addison +2 more
exaly +2 more sources
UJI PERBANDINGAN KEKUATAN TARIK PENGELASAN STAINLESS STEEL AISI 304 MENGGUNAKAN LAS TIG (TUNGSTEN INERT GAS) DAN LAS MIG (METAL INERT GAS) DENGAN VARIASI MEDIA PENDINGIN [PDF]
, 2017 Pengelasan adalah salah satu teknik penyambungan logam dengan cara mencairkan sebagian logam induk dan logam pengisi dengan atau tanpa tekanan dan dengan atau tanpa logam penambah dan menghasilkan sambungan yang kontinu. Pada penelitian ini pengelasan yang digunakan adalah las TIG (Tungsten Inert Gas) dan las MIG (Metal Inert Gas) pada material ...
Felani, Fran Nur +2 more
openaire +3 more sources
A comparative study of mechanical properties of metal inert gas (MIG)-cold metal transfer (CMT) and fiber laser-MIG hybrid welds for 6005A T6 extruded sheet [PDF]
The International Journal of Advanced Manufacturing Technology, 2017 Among the several welding technologies available today, traditional metal inert gas (MIG) one is widely used for junction of Al-alloys parts in transportation field, while cold metal transfer (CMT) and laser techniques are recent alternatives potentially providing advantages over the former one, such as reduction of deformations and reduced alteration ...
Giovanna Cornacchia +2 more
openaire +1 more source
Proceedings of the ERU Symposium 2025
Metal Additive Manufacturing (AM) has advanced significantly due to its ability to fabricate complex geometries with reduced waste and lead time, proving economic viability compared to conventional manufacturing methods [1]. Among metal AM technologies, Wire Arc Additive Manufacturing (WAAM) is particularly suited for large-scale components, leveraging
P.P.A. Manishi +8 more
openaire +1 more source
Metal Additive Manufacturing (AM) has advanced significantly due to its ability to fabricate complex geometries with reduced waste and lead time, proving economic viability compared to conventional manufacturing methods [1]. Among metal AM technologies, Wire Arc Additive Manufacturing (WAAM) is particularly suited for large-scale components, leveraging
P.P.A. Manishi +8 more
openaire +1 more source
2020
This paper presents the optimization of welding parameter for joining mild steel 1020 using ABB metal inert gas (MIG) robot welding. Mild Steel AISI 1020 with a thickness of 6 mm was selected in this experiment. The specimens cut into size 140 mm × 130 mm × 6 mm and then welded with ABB MIG robot welding used 1.0 mm electrode wire.
M. H. Osman +7 more
openaire +1 more source
This paper presents the optimization of welding parameter for joining mild steel 1020 using ABB metal inert gas (MIG) robot welding. Mild Steel AISI 1020 with a thickness of 6 mm was selected in this experiment. The specimens cut into size 140 mm × 130 mm × 6 mm and then welded with ABB MIG robot welding used 1.0 mm electrode wire.
M. H. Osman +7 more
openaire +1 more source
International Journal of Fatigue, 2021
Abstract The weld reinforcement has a strong impact on mechanical properties of MIG welded joints. This paper investigates the effect of weld reinforcement on tensile, high cycle fatigue and fatigue crack propagation properties of 5083 MIG welded joint through experimentation and numerical simulations.
Mingyang Ma +5 more
openaire +1 more source
Abstract The weld reinforcement has a strong impact on mechanical properties of MIG welded joints. This paper investigates the effect of weld reinforcement on tensile, high cycle fatigue and fatigue crack propagation properties of 5083 MIG welded joint through experimentation and numerical simulations.
Mingyang Ma +5 more
openaire +1 more source