Results 51 to 60 of about 60,930 (262)

Prediction of bending properties for beech lumber using stress wave method

Maderas: Ciencia y Tecnología, 2014
In this study; bending properties of beech wood (Fagus orientalis) were predicted using stress – wave method and compared with static bending tests. First, lumbers which were different in length and cross section were weighed and dimensions were measured.
Ergun Guntekin, Serhat Ozkan, Tugba Yilmaz   +2 more
doaj  

Fatigue Crack Initiation and Growth in Nanocrystalline Ni at Multiple Length‐Scales

Advanced Engineering Materials, EarlyView.
Overview of miniaturized in situ SEM fatigue setup and resultant fatigue crack growth data for nanocrystalline Ni. The presented study focuses on the analysis of fatigue crack growth rate (FCGR) in focused ion beam‐notched microcantilevers prepared from nanocrystalline (NC) Ni as a model material.
Igor Moravcik, Alexander Jelinek, Markus Alfreider, Jutta Luksch, Anton Hohenwarter, Florian Schaefer, Christian Motz, Daniel Kiener   +7 more
wiley   +1 more source

Determination of the mechanical properties of recycled brick aggregate concrete by multivariate regression analysis

Advances in Civil and Architectural Engineering
This study presents regression models for prediction of compressive strength and modulus of elasticity, applying variables such as the percentage of recycled brick aggregate replacement, cement content, and water-cement ratio.
Nikolina Karakaš Janjić, Tanja Kalman Šipoš, Mirta Benšić   +2 more
doaj   +1 more source

A Lightweight Procedural Layer for Hybrid Experimental–Computational Workflows in Materials Science

Advanced Engineering Materials, EarlyView.
We unveil a prototype hybrid‐workflow framework that fuses automatedcomputation with hands‐on experiments. Built atop pyiron, a lightweight, parameterized layer translates procedure descriptions into executable manual steps, syncing instrument settings, human interventions, and data capture in real‐time today.
Steffen Brinckmann, Sarath Menon, Raphael Röske, Johannes Steinhülb, Michael Selzer, Jan Janssen, Tilmann Hickel, Ruth Schwaiger, Jörg Neugebauer   +8 more
wiley   +1 more source

Creep‐Induced Microstructural Evolution in an A2‐B2 Superalloy

Advanced Engineering Materials, EarlyView.
A 27.3Ta‐27.3Mo‐27.3Ti‐8Cr‐10Al (at.%) refractory high‐entropy alloy with precipitation‐strengthened A2‐B2 microstructure was studied by creep tests at 1030°C, which demonstrate a transition in deformation mechanisms in the range of 100–150 MPa applied stress. This is associated with changes in dislocation–precipitate interactions. Relevant deformation
Liu Yang, Aparajita Pramanik, Sandipan Sen, Shubhashis Dixit, Marcel Muench, R. J. Vikram, Daniel Schliephake, Yolita M. Eggeler, Ankur Chauhan, Martin Heilmaier, Alexander Kauffmann   +10 more
wiley   +1 more source

Adjustment of the calculated value of the elasticty modulus of asphalt concrete

Дороги і мости
Introduction. One of the most important characteristics of asphalt concrete that characterizes its properties is the elasticity modulus. The elasticity modulus of asphalt concrete is used in the design of pavement structures to calculate its permissible ...
Authors Alina Yunak, Ivan Kopynets, Oksana Sokolova   +2 more
doaj   +1 more source

Experimental assessment of the influence of multiple cyclic loading on the dynamic modulus of elasticity of concrete

MATEC Web of Conferences, 2017
The goal of the experiment was to determine the influence that cyclic loading has on concrete dynamic modulus of elasticity and compressive strength. Each test specimen was subjected to cyclic loading with the loading force equivalent to one third of the
Misák Petr, Kocáb Dalibor, Daněk Petr, Kucharczyková Barbara, Topolář Libor   +4 more
doaj   +1 more source

Influence of Test Temperature and Test Frequency on Fatigue Life of Aluminum Alloy EN AW‐2618A

Advanced Engineering Materials, EarlyView.
The influence of test temperature and test frequency on the fatigue life of EN AW‐2618A is investigated. High‐cycle fatigue tests are performed at different test temperatures and frequencies on the 1000 h/230°C overaged state. Both test parameters reduce fatigue life due to time‐dependent damage mechanisms.
Ying Han, Julian M. Rosalie, Jan Radners, Mauro Madia, Philipp von Hartrott, Birgit Skrotzki   +5 more
wiley   +1 more source

High‐Temperature Nanoindentation of Metals: Assessing Thermal Drift, Frame Compliance, and Chemical Composition Effects on the Reported Mechanical Properties

Advanced Engineering Materials, EarlyView.
Do not let thermal drift and instrument artifacts deceive high‐temperature nanoindentation results. We compare classical Oliver–Pharr and automatic image recognition analyses across steels and a Ni alloy to quantify these effects. Accounting for artifacts reveals systematic softening with temperature, while Cr and Ni additions boost resistance ...
Velislava Yonkova, Steffen Brinckmann, Ruth Schwaiger   +2 more
wiley   +1 more source

Physical and Mechanical Properties of Lightweight Expanded Clay Aggregate Concrete

Buildings
The porous nature of lightweight expanded clay aggregate (LECA) is decisive in the physical and mechanical properties of concrete. A comprehensive experimental study consisting of 13 different mixtures and 234 specimens was carried out on density ...
Orkun Uysal, İlbüke Uslu, Can B. Aktaş, Byungik Chang, İsmail Özgür Yaman   +4 more
doaj   +1 more source