Nanoscale Quantification of Moisture Susceptibility of Paving Asphalts [PDF]
Moisture-induced damage due to stripping is one of the major concerns to the highway agencies in recent years. In this study, nanoscopic investigations were carried out to examine the effects of moisture in asphalt binders. An Atomic Force Microscope (AFM) was used to estimate the asphalt binder’s modulus and adhesion values, which were believed to be ...
Roy Sumon, Hossain Zahid
openaire +2 more sources
Comprehensive Assessment of Nano-Silica Modified Asphalt Mixtures: Influence of RAP Content, Aging, and Performance Characteristics [PDF]
Using recycled asphalt pavement (RAP) in asphalt mixtures is common for improving sustainability, but it can lower performance because of the aging and hardening of RAP binder. Aged RAP is stiffer, less flexible, and more prone to cracking.
Esmaiel Taheri +2 more
doaj +1 more source
Assessing the Moisture and Aging Susceptibility of Cold Mix Asphalt Concrete
Laboratory experience in Iraq with cold asphalt concrete mixtures is very limited. The design and use of cold mixed asphalt concrete had no technical requirements. In this study, two asphalt concrete mixtures used for the base course were prepared in the laboratory using conventional cold-mixing techniques to test cold asphalt mixture (CAM) against ...
Zahraa Ahmed Samor, Saad Issa Sarsam
openaire +3 more sources
Evaluation of Polyaminoamide as a Surfactant Additive in Hot Mix Asphalt
The phenomenon of breaking the bond between the aggregates and the bitumen is known as stripping. Stripping of asphalt films from the surface of aggregate particles results in premature failure of asphalt pavement.
Viktors Haritonovs
doaj +1 more source
Moisture susceptibility of porous asphalt mixture with Nano silica modified asphalt binder [PDF]
This paper presents the mechanical properties of porous asphalt (PA) with nanosilica (NS) modified asphalt binder in terms of its Moisture Susceptibility.
Mohamad Idris, Ali +5 more
core +1 more source
Tube Suction Test to Measure Moisture Susceptibility of Australian Pavements [PDF]
Moisture ingress is a primary catalyst for pavement damage and plays a key role in the performance of pavement materials in service. Moisture intrusion eventuates to early development of deficiencies (potholes) due to “pumping” effects and reduced ...
Peerapong Jitsangiam (23298307) +2 more
core +2 more sources
Properties of asphalt mixture play a vital role in structural integrity and performance of flexible pavements structure. In flexible pavements, asphalt concrete surface layer consists of asphalt binder, aggregates and in some cases additives.
Mahmoud Ameri +5 more
doaj +1 more source
INVESTIGATING THE MOISTURE SUSCEPTIBILITY OF ASPHALT MIXTURES MODIFIED WITH HIGH-DENSITY POLYETHYLENE [PDF]
Flexible pavements are susceptible to the damaging effects of moisture, causing various kinds of problemes for asphalt such as stripping. That reduces the durability and serviceability life of pavements and consequently increases the construction and ...
Ghada Moussa +2 more
doaj +1 more source
Estimating moisture susceptibility of asphalt modified with alumina trihydrate [PDF]
The moisture susceptibility of asphalt containing alumina trihydrate (ATH) was assessed through the surface free energy. Physical properties and flame retardancy of ATH samples were also investigated.
Sheng Bo Zhou +5 more
core +1 more source
Investigation of nano ulexite mineral effects on mechanical behaviour of warm mix asphalt pavements
The research presented in the paper shows that further investigations on additives used in the warm mix asphalt technology are needed. It was observed that the negative effect of adhesion loss in asphalt mixes produced by warm process can be reduced by ...
Tuba Kütük-Sert, Resul Ekrem Günbey
doaj +1 more source

