Results 1 to 10 of about 807 (207)
Localized Corrosion of Mooring Chain Steel in Seawater [PDF]
Corrosion of mooring chains is regarded as one of main threats to the offshore mooring systems. Localized corrosion is even more dangerous than uniform corrosion because it may not show significant mass loss but it can cause stress concentration and ...
Xiaolong Zhang +3 more
doaj +5 more sources
Fatigue analysis on the mooring chain of a spread moored FPSO considering the OPB and IPB
The appropriate design of a mooring system to maintain the position of an offshore structure in deep sea under various environmental loads is important. Fatigue design of the mooring line considering OPB/IPB(out-of-plane bending/in-plane bending) became ...
Yooil Kim, Min-Suk Kim, Myong-Jin Park
doaj +4 more sources
Sensitivity Analysis of Mooring Chain Fatigue of Floating Offshore Wind Turbines in Shallow Water
Shallow-water mooring chains of floating offshore wind turbines pose challenges such as nonlinear tension characteristics, high cost and prominent fatigue issues, which seriously hinder the large-scale use of floating wind power.
Jiahao Chen +3 more
doaj +3 more sources
In this paper, a yacht project in Tingjiang Town, Mawei, Fujian, is suggested as an example of a barge type breakwater made out of scrap barges. The physical modelling of a two-dimensional flume wave test was carried out on a barge-type breakwater ...
Xiaofei Cheng, Shimin Li, Gang Wang
doaj +1 more source
Effects of mooring systems on dynamic response of wave energy converter
ObjectivesAiming at a mooring system design with cost-effectiveness and high performance for wave energy converter (WEC) , the effects of such systems on the capability of power take-off (PTO) system and positioning performance of WEC are investigated ...
Yushun LIAN +4 more
doaj +1 more source
At present, researches on floating offshore wind turbine are mainly focused on deep water areas beyond 50 m, and less research has been conducted for shallow water. Considering that the floating fan still has many application values in 30 m–50 m area, it
Fali Huo +4 more
doaj +1 more source
Design of embedded chain inverse catenary of deepwater FPSO mooring suction pile
FPSO is the main development model of deepwater oil field in South China Sea, and it has high requirements for the reliability of single-point mooring system.
Xuanze JU +5 more
doaj +1 more source
At present, dry wellheads are usually adopted on small-storage TLP and SPAR platforms to develop offshore oil and gas because of the robust hydrodynamic performance under severe-wind seas.
Yan Li +6 more
doaj +1 more source
As the offshore wind industry develops, more lease sites in the intermediate water depth (50–85 m) are being released to developers. In these water depths floating wind turbines with chain catenary systems and fixed-bottom turbines with jacketed ...
William West +3 more
doaj +1 more source
Modification of Surface Buoy to Preserve Under Water Habitat in Raja Ampat
The ecosystem of the seabed is threatened by anchoring operations. Modifications were required to reduce the damage to seabed biodiversity. A laid chain on a mooring system is one of the causes of damage to the seabed environment.
Ocid Mursid, Nurul Huda, Haris Nubli
doaj +1 more source

