Thermo-Insulating Moulding Sand for thin Walled Castings [PDF]
Archives of Metallurgy and Materials, 2014 In paper the selection of the composition and determination of main properties of novel moulding sand was described. The mail goal was to create moulding sand characterized by high thermal insulating properties in relations with low specific weight. This
Cholewa M., Szuter T.
doaj +3 more sources
Results in Materials, 2021 Moulding sand-related process parameters and properties were analyzed and optimized using design-expert software. The moulding sand mix was prepared using seven different particle sizes of the silica sand and weight percentages of clay and moisture ...
Francis Odikpo Edoziuno +5 more
doaj +2 more sources
Influence of Quartz Sand Quality on Bending Strength and Thermal Deformation of Moulding Sands with Synthetic Binders [PDF]
Archives of Foundry Engineering, 2015 Modern techniques of castings production, including moulding sands production, require a strict technological regime and high quality materials. In the case of self-hardening moulding sands with synthetic binders those requirements apply mainly to sand ...
Dobosz St. M. +3 more
doaj +2 more sources
Investigations of the Influence of the Matrix Recycling on Properties of the Moulding Sand with Geopol 618 Binder [PDF]
, 2013 Self-hardening moulding sands with water-glass hardened by liquid esters are applied in several foundry plants for making moulds for the production of heavy iron and steel castings. The main good point of this process is a low cost of sands.
J. Kamińska
core +8 more sources
Selection of Effective Temperature for Thermal Regeneration of Spent Alkali-Phenolic Binder Moulding Sand. [PDF]
Materials (Basel), 2023 Łucarz M.
europepmc +3 more sources
Selection of hardening technology of moulding sand with hydrated sodium silicate binder devoted to aluminum alloys ablation casting [PDF]
Archives of Metallurgy and Materials, 2019 The ablation casting technology consists in pouring castings in single-use moulds made from the mixture of sand and watersoluble binder. After pouring the mould with liquid metal, while the casting is still solidifying, the mould destruction (washing out,
K. Major-Gabryś +3 more
doaj +3 more sources
Effects of Moisture and Content of Moulding Sand Bentonite on the Electric Properties [PDF]
Archives of Metallurgy and Materials, 2018 The paper presents the results of laboratory tests into the effects of moisture and the content of two types of bentonite on dielectric properties of moulding sand.
D. Nowak
doaj +3 more sources
The Impact of Microwave Penetration Depth on the Process of Heating the Moulding Sand with Sodium Silicate [PDF]
Archives of Foundry Engineering, 2017 This paper presents the impact of microwave penetration depth on the process of heating the moulding sand with sodium silicate. For each material it is affected by: the wavelength in vacuum and the real and imaginary components of the relative complex ...
Nowak D.
doaj +2 more sources
Polymer Binder BioCo3 with Silicates and its Application to Microwave-Cured Moulding Sand [PDF]
Archives of Foundry Engineering, 2017 The effects of silica additive (Poraver) on selected properties of BioCo3 binder in form of an aqueous poly(sodium acrylate) and dextrin (PAANa/D) binder were determined.
Grabowska B. +5 more
doaj +2 more sources
A new numerical simulation model for high pressure squeezing moulding [PDF]
China Foundry, 2011 High pressure squeeze is the most popular moulding process applied in modern moulding machines. Because of the unique characters of moulding sand and nonlinearity of squeezing process, the mechanical model is of key importance for computer simulation ...
Li Hua, Wu Junjiao, Huang Tianyou
doaj +2 more sources