Results 81 to 90 of about 575 (175)

Effects of Nanofillers on Water Resistance and Dimensional Stability of Solid Wood Modified by Melamine-Urea-Formaldehyde Resin

, 2007
The water absorption and dimensional stability of wood impregnated with melamine-ureaformaldehyde (MUF) and wood impregnated with different nanofiller/MUF formulations were investigated.
Wan, Hui, Cai, Xiaolin, Riedl, Bernard, Zhang, S. Y.   +3 more
core  

WHEAT STRAW AS RAW MATERIAL FOR MANUFACTURE OF STRAW MDF

BioResources, 2010
Wheat straw was used to produce medium-density fiberboard (MDF). The chemical and physical characteristics of fractionated size-reduced wheat straw were investigated.
Sören Bernhard Halvarsson, Håkan Edlund, Magnus Norgren   +2 more
doaj  

Acetals – induced strength increase of Melamine-Urea-Formaldehyde (MUF) polycondensation adhesives. II. Solubility and colloidal state disruption

, 2002
The strength improvement induced by addition of acetals such as methylal and ethylal in melamine-urea-formaldehyde (MUF) resins could be mostly ascribed to the increased effectiveness and participation of the melamine to resin cross-linking.
K. RODE, P. DALET, H. PASCH, A. PIZZI, ZANETTI, MICHELA, M. BEAUJEAN   +5 more
core  

The use of high-frequency technology for bonding veneer plywood with mixtures od liquefied wood and MUF adhesives

, 2020
Proučevali smo mehanske in fizikalne lastnosti furnirnih bukovih vezanih plošč, ki so bile z visokofrekvenčno tehnologijo (VF) zlepljene z različnimi mešanicami melamin-urea-formaldehidnega (MUF) lepila in utekočinjenega lesa (UL).
Veberič, Rok
core  

Production of water tolerant melamine-urea-formaldehyde resin by incorporation of sodium metabisulphite

, 2016
The aim of this work was the development of a new MUF resin formulation with high tolerance towards water dilution, and a good overall performance in terms of physico-mechanical properties and formaldehyde emissions.
Jorge Martins, Fernão D. Magalhães, Nádia T. Paiva, João M. Ferra, João Pereira, Luísa Carvalho   +5 more
core   +1 more source

Effect of Soy Protein on the Toughness and Bonding Performances of Cold-Setting Melamine-Urea-Formaldehyde Resin Adhesive

BioResources
The effects of adding defatted soybean flour (SF) at different stages of the “alkali-acid-alkali” process were studied relative to the viscosity, impact toughness, bonding strength, and water resistance of melamine-urea-formaldehyde (MUF) resin.
Jiankun Liang, Bengang Zhang, Hui Yang, Tong Meng, Chuchu Chen, Huali Li, Cheng Li, Zhigang Wu   +7 more
doaj  

Production of high density particleboard using melamine-urea-formaldehyde resin [PDF]

, 2017
This research was developed aiming to evaluate the effects of board density and melamine-urea-formaldehyde resin on the properties of particleboard for semi-structural applications. The boards were manufactured with nominal density of 0.65 g/cm³ and 0.90
Iwakiri, Setsuo, Cardoso Junior, Antonio Américo, Chipanski, Edielma do Rocio, Andrade, Alan Sulato de, Prata, José Guilherme, Adriazola, Márcia Keiko Ono   +5 more
core  

Modification of Poplar Wood with Different Resins: A Sustainable Solution for the Furniture Industry

BioResources
Poplar wood (Populus deltoides), a fast-growing and abundant species, holds promise for sustainable material use, but its low density, poor dimensional stability, and weak strength restrict high-value applications.
Zahra Faraji Delavar, Peyman Ahmadi
doaj  

Montmorillonite Nanoparticle Distribution and Morphology in Melamine-Urea-Formaldehyde Resin-Impregnated Wood Nanocomposites

, 2010
Attempts were made to investigate nanoparticle distribution in aspen by using electron probe microanalysis (EPMA) and Wincell software analysis to detect and analyze aluminum elements of impregnated montmorillonite (MMT) nanoclays.
Wan, Hui, Cai, Xiaolin, Riedl, Bernard, Zhang, S. Y.   +3 more
core  

Optimization and Characterization of Melamine Urea Formaldehyde (MUF) Based Adhesive With Waste Rubber Powder (WRP) as Filler [PDF]

, 2013
Fillers are added in adhesive formulation to minimize the utilization of resin in wood based products. Waste Rubber Powder is being used as wood adhesive filler in order to change the research work from waste to wealth.
Nitthiyah, Jeyaratnam
core