Results 51 to 60 of about 30,315 (187)
Crystallization of In-Situ SiC-Mullite Composites from Multicomponent Alumina-Silica Gels
Silica and alumina gels were mixed to make a hybrid of a mullite precursor gel and a silicon carbide precursor gel. The crystallization of these above 1400 °C, to form in-situ composites of silicon carbide whiskers in a matrix of mullite, cristobalite ...
A. Parvizi-Majidi, S. Jagota
core +1 more source
Impact of Different Types of Dust on Solar Glass Transmittance and PV Module Performance
This study characterizes the soiling losses between four natural dusts. It identifies significant differences in soiling losses, showing that a particular dust from Thailand has a 12.8% higher transmittance loss slope. In addition, measured slopes of Isc losses are consistently lower than calculated values, with an average discrepancy of 16.6%.
Guido Willers +4 more
wiley +1 more source
Novel MMT‐SiOC ceramic nanocomposites are prepared. At 900°C and 1200°C, growth and refinement of a crystalline α‐SiO2 phase on the MMT nanoflakes led to 2 to 5 nm pores upon etching. The size of the SiO2 domains appeared to be diffusion‐limited by turbostratic C phases in the SiOC matrix.
Advaith V. Rau, Kathy Lu
wiley +1 more source
Oxide‐Based Ceramic Matrix Composites for High‐Temperature Environments: A Review
This review examines oxide‐based ceramic matrix composites, focusing on their processing, composition, and mechanical properties for high‐temperature applications. Key topics include oxidation resistance, failure mechanisms, and corrosion behavior, with insights into their potential use in aerospace, nuclear power, and other high‐performance industries.
Karthikeyan Ramachandran +2 more
wiley +1 more source
3D printing of ceramics: Advantages, challenges, applications, and perspectives
Abstract 3D printing (3DP) technologies have transformed the processing of advanced ceramics for small‐scale and custom designs during the past three decades. Simple and complex parts are designed and manufactured using 3DP technologies for structural, piezoelectric, and biomedical applications.
Susmita Bose +16 more
wiley +1 more source
Use of Mullite Whiskers for Aluminium Matrix Composites
A process for the synthesis of mullite whiskers by firing a mixture of kaolinite, aluminium fluorite and graphite is obtained. The mullite whiskers have bar like form with average width ranging from 0.05 to 3 μm and aspect ratio of about 20. The reinforcement with mullite whiskers results in drastical improvement in wear resistance of aluminium alloy ...
Long, Than Trong +5 more
openaire +2 more sources
Matrix compositions and their impact on grain growth and strength of oxide ceramic composites
Abstract Oxide ceramic matrix composites (Ox‐CMCs) are composed of porous matrices reinforced by dense fibers to achieve high damage tolerance. It is generally assumed that their mechanical properties are fiber dominant. However, fiber strength can also be influenced by the surrounding matrix as it can affect fiber grain growth.
Renato S. M. Almeida +4 more
wiley +1 more source
MULLITE AND ITS ISOMORPHIC SUBSTITUTION OVERVIEW
The phase diagram of SiO2-Al2O3 is considered. The paper presents an overview of the methods of synthesising mullite, including the calcining of natural aluminosilicates, the Czochralski process (synthesising mullite from melt), the Verneuil process ...
Evgeniya G. Yarotskaya, Pavel P. Fedorov
doaj +1 more source
Mechanical Properties of Mullite-SiC Whisker Composites
Mechanical properties of hot-pressed mullite-SiC whisker composites were studied in relation to the whisker content and chemical composition of matrix. Grain growth of mullite was suppressed by the existence of SiC whisker in the matrix, but the densification was not inhibited by the loading of whisker up to 30 vol%.
KUMAZAWA, Takeshi +3 more
openaire +2 more sources
Alumina replica foams are coated with sodium aluminosilicate glass using a simple dip‐coating approach with an aqueous precursor. The selected glass composition is suitable for a Na+ ↔ K+ ion exchange, which is expected to increase the strength of the glass coating.
Ulf Betke +2 more
wiley +1 more source

