Results 1 to 10 of about 47,985 (175)

The Influence of the Composition of Pulp and the Number of Layers on the Strength Properties of Multi-Layer Papers Intended for the Production of Corrugated Paperboard

BioResources
This research investigated the influence of the layered structure of paper on its selected strength properties. Two types of cellulose pulp were used: unbleached kraft pine pulp (UBSK) and unrefined bleached birch kraft pulp (BHK).
Karolina Radomska, Konrad Olejnik, Piotr Pospiech   +2 more
doaj   +5 more sources

Multi-ply Sheet formation for woodfree paper (Multijet head box), economy and technical feasibility.

JAPAN TAPPI JOURNAL, 1994
The equipment which produces three-ply woodfree paper can be installed nowadays by using the established technical methods. This concept is significant only when the printability of outer plies is better than that of inner ply and the cost of material for inner ply is obviously cheaper than that for outer plies.
Fischer, Joerg, Meinecke, Arbrecht
openaire   +2 more sources

From Fabric to Fiber: A Study on the Use of Cotton Textile Waste in Papermaking

Journal of Natural Fibers
Currently, recycling fibrous materials has become a key challenge in sustainable waste management. The presented research investigates the potential use of waste cotton fibers from the textile industry as an additive to kraft pulp used in paper ...
Arttu Järvinen, Konrad Olejnik, Jarkko Männynsalo, Karolina Radomska, Piotr Kulpiński   +4 more
doaj   +1 more source

Modelling the Moisture Content of Multi-Ply Paperboard in the Paper Machine Drying Section

, 2006
This thesis presents a grey-box model of the temperature and moisture content for each layer of the multi-ply paperboard inside the drying section of a paper mill. The distribution of the moisture inside the board is an important variable for the board quality, but is unfortunately not measured on-line.
openaire   +1 more source

A Principle of Producing Multi-ply Paper Using a Wire in an Inclined Wire Machine

Paper and Biomaterials, 2019
Song-Il Pak, Yong-Il Ri, Chol-Ho Kim
openaire   +1 more source

A Mediator‐Free Multi‐Ply Biofuel Cell Using an Interfacial Assembly between Hydrophilic Enzymes and Hydrophobic Conductive Oxide Nanoparticles with Pointed Apexes

Advanced Materials, 2023
Donghyeon Nam, Jeongyeon Ahn, Seung Woo Lee   +2 more
exaly  

Numerical and experimental investigation of first ply failure response of multi-walled carbon nanotubes/epoxy/glass fiber hybrid laminated tapered curved composite panels

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2022
Mesfin Kebede Kassa, Lavish Kumar Singh, Ananda Babu Arumugam   +2 more
exaly  

A Numerical Study of the Effects of Projectile Properties on the Impact Behavior of Multi-ply Flexible Fabrics

Applied Composite Materials, 2023
Emre Palta, Hongbing Fang
exaly  

Effect of Grade and Mixing Ratio of Pulps on the Physical Properties and Drying Efficiency of Multi-ply Thin Paper

Journal of Korea Technical Association of The Pulp and Paper Industry
Ji Hyun Tak, Sung Gyu Park, Hae Min Jo, Ji Young Lee   +3 more
openaire   +1 more source

Specification for non-returnable multi-ply paper sacks for loose ware potatoes

2015
openaire   +1 more source