Results 181 to 190 of about 184,273 (243)
Aging-Feature-Extraction Method Based on the Short-Axis Diameter Ratio of Serviced Rubber Strips. [PDF]
Polymers (Basel)Chen Y +9 more
europepmc +1 more source
Some of the next articles are maybe not open access.
Related searches:
Related searches:
Journal of Applied Polymer Science, 2002
AbstractWe studied the crosslinking of conventional nitrile rubber with metal peroxide at varying temperatures. Crosslink density, measured by swelling in the solvent until equilibrium, and the reaction rate increased with temperature, suggesting that crosslinking is a function of peroxide decomposition.
L Ibarra
exaly +2 more sources
AbstractWe studied the crosslinking of conventional nitrile rubber with metal peroxide at varying temperatures. Crosslink density, measured by swelling in the solvent until equilibrium, and the reaction rate increased with temperature, suggesting that crosslinking is a function of peroxide decomposition.
L Ibarra
exaly +2 more sources
2021
Nitrile rubber (NBR) and nitrile rubber–polyvinyl chloride (NBR-PVC50/50) (NVC55) blends are vulcanized by sulphur curing system using high abrasion furnace carbon black (CB-HAF) and graphite (GT) as reinforcements in the present investigation. The mechanical properties of the compositions are evaluated.
D. Murali Manohar +2 more
openaire +1 more source
Nitrile rubber (NBR) and nitrile rubber–polyvinyl chloride (NBR-PVC50/50) (NVC55) blends are vulcanized by sulphur curing system using high abrasion furnace carbon black (CB-HAF) and graphite (GT) as reinforcements in the present investigation. The mechanical properties of the compositions are evaluated.
D. Murali Manohar +2 more
openaire +1 more source
Rubber Chemistry and Technology, 1980
Abstract In a mixed crosslink system (sulfur and metal carboxylate) of XNBR vulcanizate, the variations of the proportions of curatives (low sulfur/high accelerator or high sulfur/low accelerator) have little effect on the vulcanizate properties.
A. K. Bhowmick, S. K. De
openaire +1 more source
Abstract In a mixed crosslink system (sulfur and metal carboxylate) of XNBR vulcanizate, the variations of the proportions of curatives (low sulfur/high accelerator or high sulfur/low accelerator) have little effect on the vulcanizate properties.
A. K. Bhowmick, S. K. De
openaire +1 more source
1990
Nitrile rubbers are broadly defined as copolymers of a diene and a vinyl unsaturated nitrile. This chapter will focus primarily on emulsion-polymerized copolymers of 1, 3-butadiene and acrylonitrile, which represent the bulk of the commercially available nitrile elastomers.
Donald E. Mackey, Charles E. Weil
openaire +1 more source
Nitrile rubbers are broadly defined as copolymers of a diene and a vinyl unsaturated nitrile. This chapter will focus primarily on emulsion-polymerized copolymers of 1, 3-butadiene and acrylonitrile, which represent the bulk of the commercially available nitrile elastomers.
Donald E. Mackey, Charles E. Weil
openaire +1 more source
Nitrile and Polyacrylic Rubbers
1987Nitrile-butadiene and polyacrylic elastomers fall into the class of special-purpose, oil-resistant rubbers. Nitrile elastomers offer a broad balance of low temperature, oil, fuel and solvent resistance as related to acrylonitrile content. These characteristics, combined with their good abrasion and water-resistant qualities, make them suitable for use ...
Donald A. Seil, Fred R. Wolf
openaire +1 more source
Blends of polyaniline with nitrilic rubber
Journal of Applied Polymer Science, 2000Nitrilic rubbers containing 29 or 45% of acrylonitrile were blended with polyaniline doped with different acids (chloridric, dodecylbenzenesulfonic, tetrapropylbenzenesulfonic, and p-toluenesulfonic acids). The blends were prepared by mechanical mixing in a roll-mill and vulcanized in a hot press. The volumetric conductivities and mechanical properties
M. R. Vallim +2 more
openaire +1 more source
Anisotropy in Molded Nitrile Rubber
Rubber Chemistry and Technology, 1975Abstract Measurements of linear swelling in solvent of small test pieces provide a useful means of investigating anisotropy in vulcanized products and components whose small size precludes the use of conventional tests on dumbbells, etc. Anisotropy has been found to be present in molded components.
C. M. Blow +2 more
openaire +1 more source
Degradation of hydrogenated nitrile rubber
Polymer Degradation and Stability, 1991Abstract Studies of low temperature degradation were carried out on hydrogenated (HNBR), highly saturated (HSN) nitrile rubber and nitrile rubber (NBR) in the temperature range 75°C to 150°C in the presence of air and high-temperature degradation in the presence of nitrogen from room temperature to 800°C.
Susmita Bhattacharjee +2 more
openaire +1 more source
Progress in Rubber and Plastics Technology, 2001
Blending of nitrile rubber with plasticised PVC produces vinyl-based thermoplastic elastomers. These materials offer a versatile range of properties and are used in numerous applications; such as glazing gaskets, footwear, cable jacketing, hose, tubing and coated fabrics.
N.L. Thomas, R.J. Harvey
openaire +1 more source
Blending of nitrile rubber with plasticised PVC produces vinyl-based thermoplastic elastomers. These materials offer a versatile range of properties and are used in numerous applications; such as glazing gaskets, footwear, cable jacketing, hose, tubing and coated fabrics.
N.L. Thomas, R.J. Harvey
openaire +1 more source