Results 41 to 50 of about 216,053 (237)

A Novel Modified Petroresin Particle (MPRP) With Enhanced Oil–Water Selectivity for Cold Production in Heavy Oil Reservoirs

open access: yesAdvanced Functional Materials, EarlyView.
A novel oil–water selective conformance control agent, MPRP, is prepared via hydrophilic grafting and mechanical granulation. MPRP uniformly disperses in water, cohesively expands upon aging, and readily dissolves in the oil phase. During conformance control, it selectively aggregates in water channeling pathways to form effective plugs without ...
Guang Zhao   +6 more
wiley   +1 more source

CHANGES OF THE NATURAL ELECTRICAL POTENTIAL OF STEEL IN THE STRESS-STRAIN STATE

open access: yesИзвестия высших учебных заведений: Нефть и газ, 2015
The experimental investigations of steel samples under the influence of the bending load were conducted. It is demonstrated that in the event of the steel stress-strain state occurrence, its natural electric potential changes.
S. V. Loparev   +3 more
doaj   +1 more source

Influence of Hydrate Formation and Concentration of Salts on the Corrosion of Steel 20 Pipelines

open access: yesManagement Systems in Production Engineering, 2020
One of the ways to increase natural gas production is to conserve and/or intensify existing wells with their subsequent development. They are characterized by a high content of highly mineralized water, which leads to an increased risk of hydrate ...
Poberezhny Lubomyr   +6 more
doaj   +1 more source

Occurrence, Genesis, and Significance of Analcime in Fine-Grained Sedimentary Rocks

open access: yesGeofluids, 2022
Natural analcime, an aluminosilicate mineral with multiple genetic mechanisms, widely occurs in fine-grained sedimentary reservoirs rich in oil and gas.
Junran Wang   +3 more
doaj   +1 more source

Biomimetic Vascular Scaffold with Seamless Electrospun Aligned Nanofiber Conduit and 3D‐Printed Coil Reinforcement

open access: yesAdvanced Healthcare Materials, EarlyView.
We introduce a new fabrication method that overcomes the current limitation of tubular gap electrospinning. We successfully fabricated a seamless hollow tube with fibers aligned along the longitudinal axis in diameters as small as 300 µm, and then reinforced it using 4‐axis 3D printing.
Seyed Aliakbar Hosseini Toopghara   +9 more
wiley   +1 more source

Design and optimization of hydrogen liquefaction process coupled with steam methane reforming and LNG cold energy

open access: yesYou-qi chuyun
ObjectiveAs a clean secondary energy source with zero emissions upon combustion, hydrogen plays a pivotal role in the global energy transition. While liquefaction is one of the most effective methods for improving hydrogen storage and transportation ...
Jinliang GENG   +7 more
doaj   +1 more source

FEATURES INTERPRETATIONS OF HORIZONTAL OIL WELL BUILD-UP TEST IN OIL AND GAS RESERVOIRS

open access: yesИзвестия высших учебных заведений: Нефть и газ, 2015
The article describes the features of well test interpretation in horizontal oil wells in the development of oil and gas reservoirs. The results obtained provided a method of estimating the vertical permeability and the anisotropy coefficient according ...
M. D. Zejnal'-Abidin   +3 more
doaj   +1 more source

Plasmonic Enhancement of Fluorescence and Protein Dynamics in Living Mammalian Cells

open access: yesAdvanced Materials, EarlyView.
This study demonstrates plasmonic enhancement of the function of fluorescent voltage sensing proteins (genetically encoded voltage indicators, (GEVIs), QuasAr6) in live mammalian cells. Coupling to plasmonic nanoparticles does not just increase fluorescence, but influences the protein photocycle, creating a hybrid sensor with its response speed to ...
Marco Locarno   +16 more
wiley   +1 more source

Expansion of Micro-Annulus at the Second Cementing Interface During Construction of Underground Gas Storage From Old Well

open access: yesShiyou jixie
Debonding may occur at the second cementing interface during construction of underground gas storages (UGSs) from old wells. Based on the fluid-solid interaction theory and the cohesive zone model (CZM), the Cohesive unit in ABAQUS was used to establish ...
Li Changyou, Zhang He, Li Chen, Yao Siyu
doaj   +1 more source

Mixed‐Metal Promotion in a Manganese‐Molybdenum Oxynitride as Catalyst to Integrate C─C and C─N Coupling Reactions for the Direct Synthesis of Acetonitrile from Syngas and Ammonia

open access: yesAdvanced Materials, EarlyView.
Transition metal oxy/carbo‐nitrides show great promise as catalysts for sustainable processes. A Mn‐Mo mixed‐metal oxynitride attains remarkable performance for the direct synthesis of acetonitrile, an important commodity chemical, via sequential C─N and C─C coupling from syngas (C1) and ammonia (N1) feedstocks.
M. Elena Martínez‐Monje   +7 more
wiley   +1 more source

Home - About - Disclaimer - Privacy